[U-Boot-Users] U-boot to mpc8260

[xyyiezi <xyyiezi@163.com>]

   Dear sir:      I am in an IC design company.And there ia an object of my company it is about mpc8260.We have the  circuit netlist of mpc8260,but we cann't guarantee the circuit netlist to be correct.The circuit netlist was on a SUN server which supported Linux and Cadence. We want to use the u-boot as a software verification tool to verificate the netlist. We have write a platform which was used as an hardware in the verification. And we want to load the u-boot code mpc8260 to the RAM block of the circuit netlist.In this method,we could verificate the circuit netlist by both u-boot and the platform.It will be a mode of hardware and software co-verification.     But the difficult is I don't kown how to load the u-boot.Now I have read the source code of the mpc8260 in the u-boot,and I kown I could use the GCC to translate them.I didn't kown how to configure the mpc8260.What material should I read?In my opinion,the circuit netlist will be similar to the hardware mpc8260 expect the speed while it is running.But the hardware mpc8260 has its board ,for example mpc8260ads,which is not in the circuit netlist in the SUN server.And I don't kown whether I could configure the u-boot take the board information.     I earnest hope to obtain your help!     Thank you!                                      Yours xyyiezi  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070717/898ebb16/attachment.htm