[U-Boot] [PATCH 1/4] Armada100: Ethernet support for Marvell gplugD

Ajay Bhargav
2011-07-08T10:23:17Z

Dear Wolfgang,

Thanks for info, I have seen that. But i am not adding support for GPIO commands.

In reference to

>> +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
>> +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
>> +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
>> +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
>> +#define GSDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x54)
>> +#define GCDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x60)

> Please use a C struct to dsescribe the register layout.

I have followed similar way of using GPIO as used by "drivers/gpio/kw_gpio.c" and defined in "include/asm/arch-kirkwood/gpio.h",
so actually i am not adding GPIO support rather i wrote functions that are required by the Ethernet and other drivers.

Regards,
Ajay Bhargav