From mboxrd@z Thu Jan  1 00:00:00 1970
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Wed, 28 Aug 2019 15:35:46 +0200
Subject: [U-Boot] [PATCH 26/26] configs: mtmips: add necessary drivers
 for mtmips boards
In-Reply-To: <1566974291-11750-27-git-send-email-weijie.gao@mediatek.com>
References: <1566974291-11750-1-git-send-email-weijie.gao@mediatek.com>
 <1566974291-11750-27-git-send-email-weijie.gao@mediatek.com>
Message-ID: <21f4b391-03f1-d3d3-ca64-6a10475fa057@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



Am 28.08.19 um 08:38 schrieb Weijie Gao:
> This patch adds pinctrl driver, clock gate driver and reset controller
> support for defconfig files of mtmips boards.
> 
> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
> ---
>  configs/gardena-smart-gateway-mt7688_defconfig | 6 ++++++
>  configs/linkit-smart-7688_defconfig            | 6 ++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
> index 1e270cb61d..83e793042a 100644
> --- a/configs/gardena-smart-gateway-mt7688_defconfig
> +++ b/configs/gardena-smart-gateway-mt7688_defconfig
> @@ -49,6 +49,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_HAVE_BLOCK_DEVICE=y
>  CONFIG_BOOTCOUNT_LIMIT=y
>  CONFIG_CLK=y
> +CONFIG_CLK_MTMIPS_GATE=y
>  CONFIG_LED=y
>  CONFIG_LED_BLINK=y
>  CONFIG_LED_GPIO=y
> @@ -67,10 +68,15 @@ CONFIG_PHYLIB=y
>  CONFIG_PHY_FIXED=y
>  CONFIG_MT7628_ETH=y
>  CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINMUX=y
> +CONFIG_PINCONF=y
> +CONFIG_PINCTRL_MT7628=y
>  CONFIG_POWER_DOMAIN=y
>  CONFIG_RAM=y
>  CONFIG_DM_RESET=y
>  # CONFIG_SPL_SERIAL_PRESENT is not set
> +CONFIG_RESET_MTMIPS=y

if the SoC only works with those drivers enabled, you should consider to
select all according Kconfig symbols in arch/mips/mach-mtmips/Kconfig so
an user can't configure a non-working board config by mistake.

>  CONFIG_MTK_SERIAL=y
>  CONFIG_SPI=y
>  CONFIG_MT7621_SPI=y
> diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
> index 743cc48166..13f5cf8a21 100644
> --- a/configs/linkit-smart-7688_defconfig
> +++ b/configs/linkit-smart-7688_defconfig
> @@ -40,6 +40,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
>  # CONFIG_DM_DEVICE_REMOVE is not set
>  CONFIG_BLK=y
>  CONFIG_CLK=y
> +CONFIG_CLK_MTMIPS_GATE=y
>  CONFIG_LED=y
>  CONFIG_LED_BLINK=y
>  CONFIG_LED_GPIO=y
> @@ -55,10 +56,15 @@ CONFIG_PHY_FIXED=y
>  CONFIG_MT7628_ETH=y
>  CONFIG_PHY=y
>  CONFIG_MT76X8_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINMUX=y
> +CONFIG_PINCONF=y
> +CONFIG_PINCTRL_MT7628=y
>  CONFIG_POWER_DOMAIN=y
>  CONFIG_RAM=y
>  CONFIG_DM_RESET=y
>  # CONFIG_SPL_SERIAL_PRESENT is not set
> +CONFIG_RESET_MTMIPS=y
>  CONFIG_MTK_SERIAL=y
>  CONFIG_SPI=y
>  CONFIG_MT7621_SPI=y
> 

-- 
- Daniel