[U-Boot] arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS

[Alexander Stein <alexander.stein@systec-electronic.com>]

Hi,

On Tuesday 27 October 2015 02:52:43, Huan Wang wrote:
> 	Do you have any comment about this patch?
> 	Thanks.
> > > On Tuesday 04 August 2015 09:55:37, Alison Wang wrote:
> > > > This patch addresses a problem mentioned recently on this mailing
> > > list:
> > > > [1].
> > > >
> > > > In that posting a LS1021 based system was locking up at about 5
> > > > minutes after boot,but the problem was mysteriously related to the
> > > > toolchain used for building u-boot.Debugging the problem reveals a
> > > > stuck interrupt 29 on the GIC.
> > > >
> > > > It appears Freescale's LS1021 support in u-boot erroneously sets the
> > > > 64-bit ARM generic PL1 physical time CompareValue register to all-
> > > ones
> > > > with a 32-bit value.This causes the timer compare to fire 344
> > > > seconds after u-boot configures it.Depending on how fast u-boot gets
> > > > the kernel booted,this amounts to about 5-minutes of Linux uptime
> > > > before locking up.
> > > >
> > > > Apparently the bug is masked by some toolchains. Perhaps this is
> > > > explained by default compiler options, word sizes, or binutils
> > > versions.
> > > >
> > > > To fix the above issue, the generic physical timer is disabled
> > > > before jumping to the OS.
> > > >
> > > > [1]
> > > > https://lists.yoctoproject.org/pipermail/meta-freescale/2015-
> > > June/0144
> > > > 00.html
> > > >
> > > > Signed-off-by: Chris Kilgour <techie@whiterocker.com>
> > > > Signed-off-by: Alison Wang <alison.wang@freescale.com>
> > > > ---
> > > >  arch/arm/cpu/armv7/ls102xa/cpu.c | 10 ++++++++++
> > > >  1 file changed, 10 insertions(+)
> > > >
> > > > diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c
> > > > b/arch/arm/cpu/armv7/ls102xa/cpu.c
> > > > index 75f0d8c..298422f 100644
> > > > --- a/arch/arm/cpu/armv7/ls102xa/cpu.c
> > > > +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
> > > > @@ -346,3 +346,13 @@ void smp_kick_all_cpus(void)
> > > >  	out_be32(&gur->brrl, 0x2);
> > > >  }
> > > >  #endif
> > > > +
> > > > +void arch_preboot_os(void)
> > > > +{
> > > > +	unsigned long ctrl;
> > > > +
> > > > +	/* Disable PL1 Physical Timer */
> > > > +	asm("mrc p15, 0, %0, c14, c2, 1" : "=r" (ctrl));
> > > > +	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
> > > > +	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl)); }
> > >
> > > This only disables the timer when booting linux. Does the possibly
> > > misconfigured timer compare value (only lower 32-bits are set to
> > > 0xffffffff) have any side-effects within u-boot? I don't currently
> > > know the timer is used there.
> > > I would prefer that the inline assembly code in timer_init is fixed to
> > > pass an 64-bit variable to mcrr. Maybe someone will take that code
> > > snippet as an example and such problems occur again. Opinions?
> > >
> > 
> > [Alison Wang] Thanks for your reply. I agree with you that the
> > misconfigured Timer compare value should be fixed too. So except this
> > patch, the patch on http://patchwork.ozlabs.org/patch/495476/ need to be
> > applied too.

Same opinion here. Both patches should be applied.

Best regards,
Alexander
-- 
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein at systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax:    +49 (0) 3765 38600-4100
 
Managing Directors:
	Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
	Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
	Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010