* [U-Boot] U-Boot makefiles question
@ 2009-03-27 12:35 Steven Zedeck
0 siblings, 0 replies; only message in thread
From: Steven Zedeck @ 2009-03-27 12:35 UTC (permalink / raw)
To: u-boot
Hi,
I have a general question about the U-Boot Makefiles. When I want to add a
file to one of the sub-Makefiles (such as in drivers/net/Makefile or
board/atmel/at91xxxx/Makefile), it seems I need to go through several steps
in order for the new file to get compiled. I must be doing something wrong.
I've been doing this everytime I add a new file to be compiled by a
makefile:
make distclean
make at91sam9rlek_config
make at91sam9rlek_config
make clean
make -B
It seems that if I don't do all those steps, the new file is ignored and not
compiled. I think its an issue with dependencies.
I have a similar problem when I add a new .h file to an existing .c file. It
doesn't always cause the particular .c file to get recompiled.
thanks in advance,
Steve
--
View this message in context: http://www.nabble.com/U-Boot-makefiles-question-tp22740727p22740727.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-03-27 12:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-27 12:35 [U-Boot] U-Boot makefiles question Steven Zedeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox