[U-Boot-Users] How do the arm926ejs boot from nand in Uboot?

[U-Boot-Users] How do the arm926ejs boot from nand in Uboot?

[willow]

Hi,
      My linux kernel has successfully run by U-booting from a norflash. 
     1)can the kernel based on arm 926ejs boot from nandflash?
     2)which files I must modifiy in the U-boot packet if the kernel can boot from nandflash and where can I find more imforation about this.

    will you please tell me what's the problem and how to solve it? 
   Thanks.

Yours,
Wilow

--
View this message in context: http://www.nabble.com/How-do-the-arm926ejs-boot-from-nand-in-Uboot--t880880.html#a2282897
Sent from the Uboot - Users forum at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060109/a1e510f7/attachment.htm 

[U-Boot-Users] How do the arm926ejs boot from nand in Uboot?

[Wolfgang Denk]

In message <2282897.post@talk.nabble.com> you wrote:
>
>       My linux kernel has successfully run by U-booting from a norflash. 
>      1)can the kernel based on arm 926ejs boot from nandflash?

Yes, if the port of U-Boot to your board includes NAND flash support.

>      2)which files I must modifiy in the U-boot packet if the kernel can boot from nandflash and where can I find more imforation about this.

a) enable NAND flash support; b) in the documentation and the source code.

>     will you please tell me what's the problem and how to solve it? 

Will you please tell me what the question is?

> ------=_Part_938_11713481.1136822122949
> Content-Type: text/html; charset=us-ascii
> Content-Transfer-Encoding: 7bit

And please stop posting HTML on this mailing list.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you're not part of the solution, you're part of the problem.