From mboxrd@z Thu Jan 1 00:00:00 1970 From: eija_flight Date: Wed, 1 Apr 2009 21:20:45 -0700 (PDT) Subject: [U-Boot] U-boot initialization test Message-ID: <22840615.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, Below is my board initialization process : U-Boot 1.3.1 (Nov 27 2008 - 08:30:43) MPC83XX Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c1, MPC8349E, Rev: 31 at 528 MHz, CSB: 264 MHz Board: MPX8349GC PCI1: 32 bit, 33 MHz SRAM: 1 MB I2C: ready DRAM: 512 MB (DDR2, 64-bit, ECC on) FLASH: 16 MB PCI: Bus Dev VenId DevId Class Int 00 0f 10cf 202b 0380 00 In: serial Out: serial Err: serial Net: TSEC0, TSEC1 During above initialization process of u-boot, 1. Does it conduct a test to all board hardware listed? 2. If above answer is yes, what method is used to do the test? -- View this message in context: http://www.nabble.com/U-boot-initialization-test-tp22840615p22840615.html Sent from the Uboot - Users mailing list archive at Nabble.com.