From: "Heiko Stübner" <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 19/20] rockchip: rk3188: Add Radxa Rock board
Date: Thu, 23 Mar 2017 17:34:10 +0100 [thread overview]
Message-ID: <2299959.J2ZH5qeb6C@diego> (raw)
In-Reply-To: <CAPnjgZ0XoX3M3D-Zq9cLTz4NRy4keG97H56XVpNgo_=i-=poZg@mail.gmail.com>
Hi Simon,
Am Donnerstag, 23. März 2017, 10:18:31 CET schrieb Simon Glass:
> On 21 February 2017 at 13:35, Simon Glass <sjg@chromium.org> wrote:
> > On 18 February 2017 at 11:46, Heiko Stuebner <heiko@sntech.de> wrote:
> >> The Rock is a RK3188 based single board computer by Radxa.
> >> Currently it still relies on the proprietary DDR init and
> >> cannot use the generic SPL, but at least is able to boot
> >> a linux kernel and system up to a regular login prompt.
> >>
> >> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> >> Reviewed-by: Simon Glass <sjg@chromium.org>
> >> Tested-by: Kever Yang <kever.yang@rock-chips.com>
> >> ---
> >>
> >> arch/arm/dts/Makefile | 1 +
> >> arch/arm/dts/rk3188-radxarock.dts | 382
> >> ++++++++++++++++++++++++++++++++++
> >> arch/arm/mach-rockchip/rk3188/Kconfig | 11 +
> >> board/radxa/rock/Kconfig | 15 ++
> >> board/radxa/rock/MAINTAINERS | 6 +
> >> board/radxa/rock/Makefile | 7 +
> >> board/radxa/rock/rock.c | 7 +
> >> configs/rock_defconfig | 56 +++++
> >> include/configs/rock.h | 30 +++
> >> 9 files changed, 515 insertions(+)
> >> create mode 100644 arch/arm/dts/rk3188-radxarock.dts
> >> create mode 100644 board/radxa/rock/Kconfig
> >> create mode 100644 board/radxa/rock/MAINTAINERS
> >> create mode 100644 board/radxa/rock/Makefile
> >> create mode 100644 board/radxa/rock/rock.c
> >> create mode 100644 configs/rock_defconfig
> >> create mode 100644 include/configs/rock.h
> >
> > Applied to u-boot-rockchip, thanks!
>
> Just a reminder that I had to drop this patch as it does not build.
> Can you please resend this one? I have also reverted the README patch
> but can apply that myself once this board is enabled.
ah, I should probably fold the patch fixing the build issue into this one. I'll
create a new series and collect all the different sets flying around.
Heiko
next prev parent reply other threads:[~2017-03-23 16:34 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-18 18:46 [U-Boot] [PATCH v4 00/20] rk3188 uboot support Heiko Stuebner
2017-02-18 18:46 ` [U-Boot] [PATCH v4 01/20] dm: allow limiting pre-reloc markings to spl or tpl Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 02/20] clk: rk3288: limit gpll and cpll init to SPL build Heiko Stuebner
2017-02-21 18:08 ` Simon Glass
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 03/20] rockchip: rk3288: sdram: use constants in ddrconf table Heiko Stuebner
2017-02-21 18:08 ` Simon Glass
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 04/20] rockchip: rk3288: sdram: style fixes from rk3188 sdram review Heiko Stuebner
2017-02-21 18:08 ` Simon Glass
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 05/20] rockchip: Move bootrom helper compilation to a hidden option Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 06/20] rockchip: Move bootrom-related declarations to a header Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 07/20] rockchip: mkimage: Allow encoding of loader code in spl images Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 08/20] rockchip: mkimage: Add support rk3188 serial Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 09/20] rockchip: serial: Adapt rockchip of-platdata driver for rk3188 Heiko Stuebner
2017-02-21 20:34 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 10/20] rockchip: rk3188: Add header files for PMU and GRF Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 11/20] rockchip: rk3188: Add pinctrl driver Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 12/20] rockchip: rk3188: Add sysreset driver Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 13/20] rockchip: rk3188: Add rk3066/rk3188 clock bindings Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 14/20] rockchip: rk3188: Add clock driver Heiko Stuebner
2017-02-18 18:46 ` [U-Boot] [PATCH v4 15/20] rockchip: rk3188: Add core devicetree files Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 16/20] rockchip: rk3188: Add core support Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 17/20] rockchip: rk3188: Add sdram driver Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 18/20] rockchip: rk3188: Add main, spl and tpl boards Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-02-18 18:46 ` [U-Boot] [PATCH v4 19/20] rockchip: rk3188: Add Radxa Rock board Heiko Stuebner
2017-02-21 20:35 ` Simon Glass
2017-03-23 16:18 ` Simon Glass
2017-03-23 16:34 ` Heiko Stübner [this message]
2017-02-18 18:46 ` [U-Boot] [PATCH v4 20/20] rockchip: rk3188: add README.rockchip paragraph describing sd boot Heiko Stuebner
2017-02-21 18:08 ` Simon Glass
2017-02-21 20:35 ` Simon Glass
2017-02-23 3:26 ` [U-Boot] [PATCH v4 00/20] rk3188 uboot support Simon Glass
2017-02-23 3:59 ` Heiko Stuebner
2017-02-23 16:19 ` Simon Glass
2017-02-23 16:29 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2299959.J2ZH5qeb6C@diego \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox