[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Hi Alison,

On Tuesday, May 28, 2013 9:16:20 PM, Beno?t Th?baudeau wrote:
> Hi Alison,
> 
> On Tuesday, May 28, 2013 10:55:42 AM, Alison Wang wrote:
> > This patch adds generic codes to support Freescale's Vybrid VF610 CPU.
> > 
> > It aligns Vybrid VF610 platform with i.MX platform. As there are
> > some differences between VF610 and i.MX platforms, the specific
> > codes are in the arch/arm/cpu/armv7/vf610 directory.
> > 
> > Signed-off-by: Alison Wang <b18965@freescale.com>
> 
> [...]
> 
> > diff --git a/doc/README.vf610 b/doc/README.vf610
> > new file mode 100644
> > index 0000000..38cf5cf
> > --- /dev/null
> > +++ b/doc/README.vf610
> > @@ -0,0 +1,10 @@
> > +U-Boot for Freescale Vybrid VF610
> > +
> > +This file contains information for the port of U-Boot to the Freescale
> > Vybrid
> > +VF610 SoC.
> > +
> > +1. CONVENTIONS FOR FUSE ASSIGNMENTS
> > +-----------------------------------
> > +
> > +1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2
> > and
> > the
> > +    32 lsbs in word 3.
> 
> The hunk below is still missing:
> 
> doc/README.mxc_ocotp:
> ---
>  on MXC
>  
>  This IP can be found on the following SoCs:
> + - Vybrid VF610,
>   - i.MX6.
>  
>  Note that this IP is different from albeit similar to the IPs of the same
>  name
> ---

I have just noticed that this was actually in 6/7. Why are you putting this into
a separate patch?

Best regards,
Beno?t