[U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6

[U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6

[vishalD]

Hi All,

I am new to uBoot.

I am using the sbc2410x board. I successfully compiled the uboot-1.1.6 for
this board. But after downloading the uboot.bin to the flash, i am not
getting the uboot prompt on serial terminal.

I am using the NAND flash. Do i have to make the changes for NAND flash and
recompile the uboot?


-- 
View this message in context: http://www.nabble.com/Not-getting-the-Uboot-prompt-for-sbc2410x-using-u-boot1.1.6-tp23596126p23596126.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6

[Wolfgang Denk]

Dear vishalD,

In message <23596126.post@talk.nabble.com> you wrote:
> 
> 
> I am using the sbc2410x board. I successfully compiled the uboot-1.1.6 for
> this board. But after downloading the uboot.bin to the flash, i am not
> getting the uboot prompt on serial terminal.

U-Boot 1.1.6 is obsolete. Please use current code.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Looks clean and obviously correct to me, but then _everything_ I
write always looks obviously correct to me.  - Linus Torvalds in
<Pine.LNX.4.10.10012090054360.791-100000@penguin.transmeta.com>

[U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6

[vishal dahiwal]

Hi All,

I am new to uBoot.

I am using the sbc2410x board. I successfully compiled the uboot-1.1.6 for
this board. But after downloading the uboot.bin to the flash, i am not
getting the uboot prompt on serial terminal.

I am using the NAND flash. Do i have to make the changes for NAND flash and
recompile the uboot?

[U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6

[Detlev Zundel]

Hi Vishal,

> I am new to uBoot.

Welcome.

> I am using the sbc2410x board. I successfully compiled the uboot-1.1.6 for
> this board. But after downloading the uboot.bin to the flash, i am not
> getting the uboot prompt on serial terminal.

As Wolfgang said - in the long run switching to latest code is a must if
you want to get free support.

> I am using the NAND flash. Do i have to make the changes for NAND flash and
> recompile the uboot?

Actually I doubt that this board support had a NAND boot in mind - but
looking at include/configs/sbc2410x.h only JinHua Luo will know for
sure, so I put him on CC.

Cheers
  Detlev

-- 
Computers are useless. They can only give you answers.
             -- Pablo Picasso
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de