From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steven Zedeck Date: Mon, 1 Jun 2009 07:34:46 -0700 (PDT) Subject: [U-Boot] potential Uboot Ping problem Message-ID: <23815872.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, It appears the ping in UBOOT is broken. The ping works fine if you have a network connection. But if the network connection is disconnected the ping hangs the system. There is no response to Control-C either. I have to power cycle the proto to get back to a UBOOT prompt. Is this a known issue or did I possibly break something? I have a board based on the Atmel AT91SAM9RL-EK. My theory is that it "may" be a generic problem with the uboot ping. I can't confirm that since the only hardware I have is our protos. Does anyone else have a board with another MAC/PHY that you can try this on? As for UBOOT code, our environment is based on 2008.10 code. Our MAC/PHY is the Microchip ENC28J60. Thanks, Steve -- View this message in context: http://www.nabble.com/potential-Uboot-Ping-problem-tp23815872p23815872.html Sent from the Uboot - Users mailing list archive at Nabble.com.