public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Steven Zedeck <saz@proliphix.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] potential Uboot Ping problem
Date: Mon, 1 Jun 2009 08:03:52 -0700 (PDT)	[thread overview]
Message-ID: <23816429.post@talk.nabble.com> (raw)
In-Reply-To: <B85A65D85D7EB246BE421B3FB0FBB59301D7DC94C4@dbde02.ent.ti.com>


I guess thats good news. I looked inside the cmd_ping code a bit. I bet
there's a "while" loop somewhere that is waiting for something and may not
have a timeout loop. Any ideas?

Thanks,
Steve

Premi, Sanjeev wrote:
> 
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de 
>> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Steven Zedeck
>> Sent: Monday, June 01, 2009 8:05 PM
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] potential Uboot Ping problem
>> 
>> 
>> Hi,
>> It appears the ping in UBOOT is broken. The ping works fine 
>> if you have a
>> network connection. But if the network connection is 
>> disconnected the ping
>> hangs the system. There is no response to Control-C either. I 
>> have to power
>> cycle the proto to get back to a UBOOT prompt. Is this a 
>> known issue or did
>> I possibly break something?
>> 
>> I have a board based on the Atmel AT91SAM9RL-EK. My theory is 
>> that it "may"
>> be a generic problem with the uboot ping. I can't confirm 
>> that since the
>> only hardware I have is our protos.
> 
> It was noticed on the OMAP3EVM last FRI and we were suspecting
> it to be problem with the omap3 board configuration itself.
> (Though did not spend much time in debug).
> 
> Now, I too get a feeling that it could be a generic problem.
> 
> Best regards,
> Sanjeev
>> 
>> Does anyone else have a board with another MAC/PHY that you 
>> can try this on?
>> 
>> As for UBOOT code, our environment is based on 2008.10 code. 
>> Our MAC/PHY is
>> the Microchip ENC28J60.
>> 
>> Thanks,
>> Steve
>> 
>> -- 
>> View this message in context: 
>> http://www.nabble.com/potential-Uboot-Ping-problem-tp23815872p
>> 23815872.html
>> Sent from the Uboot - Users mailing list archive at Nabble.com.
>> 
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>> 
>> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/potential-Uboot-Ping-problem-tp23815872p23816429.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

  reply	other threads:[~2009-06-01 15:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-01 14:34 [U-Boot] potential Uboot Ping problem Steven Zedeck
2009-06-01 14:42 ` Premi, Sanjeev
2009-06-01 15:03   ` Steven Zedeck [this message]
2009-06-01 22:22     ` Peter Tyser
2009-06-02  0:49       ` Steven Zedeck
2009-06-02  8:26       ` Premi, Sanjeev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=23816429.post@talk.nabble.com \
    --to=saz@proliphix.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox