[U-Boot] U-boot Version 2009.06

[U-Boot] U-boot Version 2009.06

[ragh1981]

Hello Friends,

I have a custom board with MPC8548E. I am trying to port u-boot 2009.06

By modifying the MPC8548CDS Files.

 
The main difference between CDS and our custom board is in Flash
Configuration.

Our custom board has 128MB Flash?

Which locations/file i have to change?


i configured the MPC8548CDS.h file (Flash location) but when i program and
run, the u-boot is getting struck at 0xfff80e00 location? (this is checked
using "ti" command in BDI).

What could be the problem?

How can this be debugged?

-- 
View this message in context: http://www.nabble.com/U-boot-Version-2009.06-tp24860826p24860826.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot] U-boot Version 2009.06

[willy jacobs]

On 07-08-2009 10:24, ragh1981 at gmail.com wrote:
> Hello Friends,
> 
> I have a custom board with MPC8548E. I am trying to port u-boot 2009.06
> 
> By modifying the MPC8548CDS Files.
> 
>  
> The main difference between CDS and our custom board is in Flash
> Configuration.
> 
> Our custom board has 128MB Flash?
> 
> Which locations/file i have to change?

The law.c and tlb.c in the board/<your custom board> should also be changed.
See e.g. board/tqc/tqm85xx/{law.c,tlbc} for 128 MB flash.

-- 
willy
Unclassified

------------------------------------------------------------------------------------------------------------
Disclaimer:

If you are not the intended recipient of this email, please notify the sender and delete it. 
Any unauthorized copying, disclosure or distribution of this email or its attachment(s) is forbidden. 
Thales Nederland BV will not accept liability for any damage caused by this email or its attachment(s). 
Thales Nederland BV is seated in Hengelo and is registered at the Chamber of Commerce under number 06061578.
------------------------------------------------------------------------------------------------------------