[U-Boot] How do you print/view avaliable devices?

[dbrazeau <dbrazeau1024@gmail.com>]

I working on the Katmai board.  I'm trying to run a program in the 16MB boot
flash.  The user manual states the U-boot command to load Kozio diagnostics
program is:
=> fatload xsa 0x1000000 /mnt-xsa/kdiags.katmai.img
=> bootm 0x1000000

This doesn't work as it does not define a device number, so I tried adding
the device number with no luck.  I'm using U-boot version 2009.06-rc1. 
Thanks.


Detlev Zundel wrote:
> 
> Hi dbrazeau,
> 
>> This is the command I try to execute in the U-boot console:
>>     fatload xsa 0 0x1000000 /mnt-xsa/someprogram.img
>>
>> output:
>>     ** Invalid boot device **
> 
> Do you pay for every character you send, or why are you so very
> restrictive in providing more information to your problem?  Telling us
> on what platform you work, which U-Boot version etc. would go *a long
> way* in putting us into a better position to help you.
> 
> As "git grep xsa" yields no output I'm pretty sure that you try to do
> something which is not supported - at least in mainline.
> 
> What device exactly do you try to access?
> 
> Cheers
>   Detlev
> 
> -- 
> Insider comment on Microsoft releasing Linux Hyper-V driver code under
> GPLv2:
>              "It looks like hell just froze over."
> --
> DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/How-do-you-print-view-avaliable-devices--tp24943649p24974056.html
Sent from the Uboot - Users mailing list archive at Nabble.com.