[U-Boot] How do you print/view avaliable devices?

From: dbrazeau <dbrazeau1024@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] How do you print/view avaliable devices?
Date: Fri, 14 Aug 2009 10:55:54 -0700 (PDT)	[thread overview]
Message-ID: <24975978.post@talk.nabble.com> (raw)
In-Reply-To: <20090814174252.8B1CC833DBD2@gemini.denx.de>

Ok. Thanks for your input.

wd wrote:
> 
> Dear dbrazeau,
> 
> In message <24975016.post@talk.nabble.com> you wrote:
>> 
>> I actually tried used ace as well, since I saw it being used in some of
>> the
>> environment variables.  Unfortunately that didn't work either, but had a
>> different error.
>> 
>> fatload ace 0 0x1000000 /mnt-xsa/kdiags.katmai.img
>> reading /mnt-xsa/kdiags.katmai.img
>> 
>> ** Unable to read "/mnt-xsa/kdiags.katmai.img" from ace 0:1 **
>> 
>> This error made it sound like the file wasn't even in the flash so id did
>> an
>> fatls
> 
> Indeed.
> 
>> => fatls ace 0 /mnt-xsa/
>>             ./
>>             ../
>>   1378602   kernel.img
>>  19783883   ramdisk.img
>> 
>> 2 file(s), 2 dir(s)
>> 
>> Yep, not even there.  
> 
> Right. I have to admit that I really don;t understand why you wnt into
> such adventures as trying to use a phantasy device name (xsa) after
> verifying that the file you were looking for was not even present on
> the CompactFlash card you are using.
> 
>> Now I tried transferring the program image via tftp a running it but it
>> fails with an illegal instruction. Here is the output:
>> 
>> tftp 0x100000 kdiags.katmai.img
> ...
>> Bytes transferred = 893996 (da42c hex)
> 
> So this works perfectly fine.
> 
>> => go 0x100000
>> ## Starting application at 0x00100000 ...
>> NIP: 00100004 XER: 00000000 LR: 1FF75C9C REGS: 1fe64cb8 TRAP: 0700 DEAR:
> ...
>> I have also tried "go 0x100004" but that didn't work either.  Am I doing
>> something wrong? Any Ideas?  Thanks for you help.
> 
> Well, the Kozio diagnostics software is aproprietary package, and if
> you cannot find out how it's working from the documentation provided
> by Kozio you should please contacxt Kozio support.
> 
> As mentioned before, it's a closed-source  proprietary  tool  and  we
> have zero information about how to run it.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> I have made mistakes, but have never made the mistake of  claiming  I
> never made one.                                     - James G. Bennet
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/How-do-you-print-view-avaliable-devices--tp24943649p24975978.html
Sent from the Uboot - Users mailing list archive at Nabble.com.