From: SlinceArm <slincearm@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ERROR: too many flash sectors
Date: Thu, 20 Aug 2009 07:45:28 -0700 (PDT) [thread overview]
Message-ID: <25063511.post@talk.nabble.com> (raw)
Hi , everyone .
My u-boot version is 2009-01 and i try porting u-boot on pxa270 development
board.
when i power on my board then minicom show these information
DRAM: 64 MB
ERROR: too many flash sectors
ERROR: too many flash sectors
Flash: 32 MB
then i can save setenv , but when i earse my flash ,it cause one error
Error: end address not on sector boundary
and here is my flinfo :
Bank # 1: CFI conformant FLASH (32 x 16) Size: 32 MB in 128 Sectors
Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 2 ms, buffer size: 64 bytes
Sector Start Addresses:
00000000 RO 00040000 RO 00080000 RO 000C0000 RO 00100000
RO
etc...
And i dont know my network chip work or not . ( my chip is LAN91C113 )
when i ping some address , it show
ethid=0000...
LAN91C113:PHY auto-negotiate timed out
then my bootloader freeze ....
would someone can help me ? thanks.
--
View this message in context: http://www.nabble.com/-U-Boot--ERROR%3A-too-many-flash-sectors-tp25063511p25063511.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
next reply other threads:[~2009-08-20 14:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-20 14:45 SlinceArm [this message]
2009-08-20 14:58 ` [U-Boot] ERROR: too many flash sectors Stefan Roese
2009-08-22 2:58 ` SlinceArm
2009-08-23 16:15 ` Penda, Naveen Kumar
2009-08-24 8:57 ` Stefan Roese
2009-08-24 14:39 ` SlinceArm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=25063511.post@talk.nabble.com \
--to=slincearm@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox