From mboxrd@z Thu Jan 1 00:00:00 1970 From: SlinceArm Date: Thu, 20 Aug 2009 07:45:28 -0700 (PDT) Subject: [U-Boot] ERROR: too many flash sectors Message-ID: <25063511.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi , everyone . My u-boot version is 2009-01 and i try porting u-boot on pxa270 development board. when i power on my board then minicom show these information DRAM: 64 MB ERROR: too many flash sectors ERROR: too many flash sectors Flash: 32 MB then i can save setenv , but when i earse my flash ,it cause one error Error: end address not on sector boundary and here is my flinfo : Bank # 1: CFI conformant FLASH (32 x 16) Size: 32 MB in 128 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 2 ms, buffer size: 64 bytes Sector Start Addresses: 00000000 RO 00040000 RO 00080000 RO 000C0000 RO 00100000 RO etc... And i dont know my network chip work or not . ( my chip is LAN91C113 ) when i ping some address , it show ethid=0000... LAN91C113:PHY auto-negotiate timed out then my bootloader freeze .... would someone can help me ? thanks. -- View this message in context: http://www.nabble.com/-U-Boot--ERROR%3A-too-many-flash-sectors-tp25063511p25063511.html Sent from the Uboot - Users mailing list archive at Nabble.com.