From mboxrd@z Thu Jan  1 00:00:00 1970
From: sunr2007 <ravilinux4u@gmail.com>
Date: Tue, 1 Sep 2009 04:38:16 -0700 (PDT)
Subject: [U-Boot] how to enable various command support in u-boot-1.3.4?
In-Reply-To: <20090901102127.65A51834A950@gemini.denx.de>
References: <25236687.post@talk.nabble.com>
	<20090901091815.4376E834A950@gemini.denx.de>
	<25237459.post@talk.nabble.com>
	<20090901102127.65A51834A950@gemini.denx.de>
Message-ID: <25238770.post@talk.nabble.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


thanks a lot Deng. sorry about previous message postin tat way. Now i was
able to compile cmd_fat.c by adding  tat CONFIG_CMD_FAT  in
/include/configs/at91sam9261ek.h. Now i want to use the atmel_spi.c driver
in /drivers/spi.
can u let me know what to add in the config file? i tried adding 
if define  CONFIG_ATMEL_SPI  AT91SAM9261_ID_SPI0 
so that it used BUS0 of the atmel SPI controller  but the compiler again
gave some error which was similar to previous error which i posted . thanks
a lot .
warm regards,
Ravi Kulkarni.

wd wrote:
> 
> Dear sunr2007,
> 
> Please make sure to read http://www.netmeister.org/news/learn2quote.html
> 
> Your message is next to impossible to read as we cannot see who wrote
> what.
> 
> In message <25237459.post@talk.nabble.com> you wrote:
>> > 
>> > Why are you not using a recent tool chain?
>> >  since i use AT91SAM9261 boards the latest patch available for that
>> board
>> > is u-boot-1.3.4 
>> > so i used u-boot-1.3.4. i used 2009-08 version and compiled but there
>> is
>> > no support patch file for tat.
>> > i got this info frm linux4sam.org.
> 
> There are several configurations for the at91sam9261ek board
> supported in recent U-Boot. Please look again.
> 
>> >> compile the u-boot but only few of files compiled. in the /common/
>> >> directory
>> >> i want to compile cmd_fat.c and cmd_spi.c . though these files are
>> there
>> >> in
>> >> Makefile im unable to compile. may i know what i need to do to compile
>> >> these
>> >> files in u-boot? do i need to enable something? thanks.:confused:
> 
> You must not trry to compile single files, because you most likely
> don't get the required options right. Just add these features into
> your board configuration.
> 
>> > i tried modifying Makefile by changing this particular line 
>> > COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o 
>> >  to 
>> > COBJS-y += cmd_fat.o
>> > but the compiler gave a error  which im posting here 
> 
> Don't do this. Instead, just add CONFIG_CMD_FAT to your board config
> file, usualklky include/configs/<name>.h
> 
> Then run "make <name>_config" and "make all"
> 
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Imitation is the sincerest form of plagarism.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/how-to-enable-various-command-support-in-u-boot-1.3.4--tp25236687p25238770.html
Sent from the Uboot - Users mailing list archive at Nabble.com.