From mboxrd@z Thu Jan  1 00:00:00 1970
From: dbrazeau <dbrazeau1024@gmail.com>
Date: Mon, 14 Sep 2009 08:56:08 -0700 (PDT)
Subject: [U-Boot] configure ppc440spe as pci adapter
In-Reply-To: <20090911133326.BC392832E8DE@gemini.denx.de>
References: <25389144.post@talk.nabble.com>
	<20090911133326.BC392832E8DE@gemini.denx.de>
Message-ID: <25438442.post@talk.nabble.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


Yes, I do mean PCIe.  Sorry should have mentioned that.

wd wrote:
> 
> Dear dbrazeau,
> 
> In message <25389144.post@talk.nabble.com> you wrote:
>> 
>> I'm trying to get my ppc440spe (Katmai) board to initialize in PCI
>> adapter
>> mode.  I was hoping that someone could give me some pointers on what
>> changes
> 
> You are really talking about the PCI-X port on the Katmai board, are
> you? You don't by any chance mean PCIe?
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Never underestimate the bandwidth of a station wagon full of tapes.
>                                 -- Dr. Warren Jackson, Director, UTCS
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/configure-ppc440spe-as-pci-adapter-tp25389144p25438442.html
Sent from the Uboot - Users mailing list archive at Nabble.com.