[PATCH 0/4] phy: add support for Amlogic Meson AXG MIPI-DSI PHY function

[Neil Armstrong <narmstrong@baylibre.com>]

Hi Simon, Tom,

Could you review patches 1 & 2 of this serie ?

Thanks,
Neil

On 29/12/2020 14:58, Neil Armstrong wrote:
> The Amlogic AXg SoCs embeds a MIPI D-PHY to communicate with DSI
> panels, this adds the bindings.
> 
> This D-PHY depends on a separate analog PHY.
> 
> The Amlogic AXG MIPI + PCIe Analog PHY provides function for both PCIe and
> MIPI DSI at the same time.
> 
> In order to configure the DSI PHY timings, a new "configure" PHY op is added to
> permit dynamic (re)configuration of the PHY function.
> 
> Finally, the Linux MIPI D-PHY configuration helpers are imported to provide a standard
> set of default D-PHY timings, timings struct and correct calculations.
> 
> Neil Armstrong (4):
>   phy: dphy: Add configuration helpers
>   generic-phy: add configure op
>   phy: Add Amlogic AXG MIPI D-PHY driver
>   phy: Add Amlogic AXG MIPI PCIe Analog PHY driver
> 
>  drivers/phy/Kconfig                      |  23 ++
>  drivers/phy/Makefile                     |   3 +
>  drivers/phy/meson-axg-mipi-dphy.c        | 393 +++++++++++++++++++++++
>  drivers/phy/meson-axg-mipi-pcie-analog.c | 233 ++++++++++++++
>  drivers/phy/phy-core-mipi-dphy.c         | 161 ++++++++++
>  drivers/phy/phy-uclass.c                 |  11 +
>  include/generic-phy.h                    |  23 ++
>  include/phy-mipi-dphy.h                  | 284 ++++++++++++++++
>  8 files changed, 1131 insertions(+)
>  create mode 100644 drivers/phy/meson-axg-mipi-dphy.c
>  create mode 100644 drivers/phy/meson-axg-mipi-pcie-analog.c
>  create mode 100644 drivers/phy/phy-core-mipi-dphy.c
>  create mode 100644 include/phy-mipi-dphy.h
>