From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bizzu (sent by Nabble.com) Date: Tue, 7 Feb 2006 10:14:31 -0800 (PST) Subject: [U-Boot-Users] u-boot kernel parameters Message-ID: <2806589.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, I have an ocotea board, the denx latest 2.6 and 2.4 kernel and u-boot 1.1.4. I downloaded everything from Wolfgang's ftp site and followed the instructions by the letter. I tftp into memory (at 100000) and bootm my kernels. I successfully boot linux 2.6 (2.6.14-rc3) on this board but kernel 2.4 (2.4.25) wont take off. This is what 2.4 gives me: (I added early serial messages for clarity) ## Booting image at 00100000 ... Image Name: Linux-2.4.25 Created: 2006-02-07 2:25:05 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 628718 Bytes = 614 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK id mach(): done MMU:enter MMU:hw init MMU:mapin MMU:mapin_ram done MMU:setio MMU:exit setup_arch: enter setup_arch: bootmem arch: exit arch: exit 2 Anyone has an idea what could be wrong? -- View this message in context: http://www.nabble.com/u-boot-kernel-parameters-t1077794.html#a2806589 Sent from the Uboot - Users forum at Nabble.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20060207/c192f717/attachment.htm