public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Date: Wed, 10 Jul 2019 12:03:07 +0200	[thread overview]
Message-ID: <2819436.V5PS3U405X@diego> (raw)
In-Reply-To: <afc2d738-2fae-29d6-051a-b8a5724d31ff@rock-chips.com>

Hi Rohan, Kever,

Am Mittwoch, 10. Juli 2019, 08:37:33 CEST schrieb Kever Yang:
> Hi Rohan,
> 
>      The code change looks good to me, but could you help to separate
> the rock pi config update into another patch?

Also, that code looks pretty much like the same in rk3399-puma.

So maybe it might be good to have this in a common location so
more boards can access common code instead of duplicating that
whole function numerous times?


Heiko


> On 2019/7/9 下午6:37, Rohan Garg wrote:
> > Generate a MAC address based on the cpuid available in the efuse
> > block: Use the first 6 byte of the cpuid's SHA256 hash and set the
> > locally administered bits. Also ensure that the multicast bit is
> > cleared.
> >
> > The MAC address is only generated and set if there is no ethaddr
> > present in the saved environment.
> >
> > This is based off of Klaus Goger's work in 8adc9d
> >
> > Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
> >
> > ---
> >
> >   board/rockchip/evb_rk3399/evb-rk3399.c | 98 ++++++++++++++++++++++++++
> >   configs/rock-pi-4-rk3399_defconfig     |  1 +
> >   2 files changed, 99 insertions(+)
> >
> > diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
> > index eb1b832274..af57cd86a5 100644
> > --- a/board/rockchip/evb_rk3399/evb-rk3399.c
> > +++ b/board/rockchip/evb_rk3399/evb-rk3399.c
> > @@ -6,8 +6,11 @@
> >   #include <common.h>
> >   #include <dm.h>
> >   #include <dm/pinctrl.h>
> > +#include <environment.h>
> > +#include <misc.h>
> >   #include <asm/arch-rockchip/periph.h>
> >   #include <power/regulator.h>
> > +#include <u-boot/sha256.h>
> >   
> >   int board_init(void)
> >   {
> > @@ -33,3 +36,98 @@ int board_init(void)
> >   out:
> >   	return 0;
> >   }
> > +
> > +static void setup_macaddr(void)
> > +{
> > +#if CONFIG_IS_ENABLED(CMD_NET)
> > +	int ret;
> > +	const char *cpuid = env_get("cpuid#");
> > +	u8 hash[SHA256_SUM_LEN];
> > +	int size = sizeof(hash);
> > +	u8 mac_addr[6];
> > +
> > +	/* Only generate a MAC address, if none is set in the environment */
> > +	if (env_get("ethaddr"))
> > +		return;
> > +
> > +	if (!cpuid) {
> > +		debug("%s: could not retrieve 'cpuid#'\n", __func__);
> > +		return;
> > +	}
> > +
> > +	ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
> > +	if (ret) {
> > +		debug("%s: failed to calculate SHA256\n", __func__);
> > +		return;
> > +	}
> > +
> > +	/* Copy 6 bytes of the hash to base the MAC address on */
> > +	memcpy(mac_addr, hash, 6);
> > +
> > +	/* Make this a valid MAC address and set it */
> > +	mac_addr[0] &= 0xfe;  /* clear multicast bit */
> > +	mac_addr[0] |= 0x02;  /* set local assignment bit (IEEE802) */
> > +	eth_env_set_enetaddr("ethaddr", mac_addr);
> > +#endif
> > +}
> > +
> > +static void setup_serial(void)
> > +{
> > +#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
> > +	const u32 cpuid_offset = 0x7;
> > +	const u32 cpuid_length = 0x10;
> > +
> > +	struct udevice *dev;
> > +	int ret, i;
> > +	u8 cpuid[cpuid_length];
> > +	u8 low[cpuid_length/2], high[cpuid_length/2];
> > +	char cpuid_str[cpuid_length * 2 + 1];
> > +	u64 serialno;
> > +	char serialno_str[17];
> > +
> > +	/* retrieve the device */
> > +	ret = uclass_get_device_by_driver(UCLASS_MISC,
> > +					  DM_GET_DRIVER(rockchip_efuse), &dev);
> > +	if (ret) {
> > +		debug("%s: could not find efuse device\n", __func__);
> > +		return;
> > +	}
> > +
> > +	/* read the cpu_id range from the efuses */
> > +	ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
> > +	if (ret) {
> > +		debug("%s: reading cpuid from the efuses failed\n",
> > +		      __func__);
> > +		return;
> > +	}
> > +
> > +	memset(cpuid_str, 0, sizeof(cpuid_str));
> > +	for (i = 0; i < 16; i++)
> > +		sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
> > +
> > +	debug("cpuid: %s\n", cpuid_str);
> > +
> > +	/*
> > +	 * Mix the cpuid bytes using the same rules as in
> > +	 *   ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
> > +	 */
> > +	for (i = 0; i < 8; i++) {
> > +		low[i] = cpuid[1 + (i << 1)];
> > +		high[i] = cpuid[i << 1];
> > +	}
> > +
> > +	serialno = crc32_no_comp(0, low, 8);
> > +	serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
> > +	snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
> > +
> > +	env_set("cpuid#", cpuid_str);
> > +	env_set("serial#", serialno_str);
> > +#endif
> > +}
> > +
> > +int misc_init_r(void)
> > +{
> > +	setup_serial();
> > +	setup_macaddr();
> > +	return 0;
> > +}
> > diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig
> > index be670df23f..dc84ded86c 100644
> > --- a/configs/rock-pi-4-rk3399_defconfig
> > +++ b/configs/rock-pi-4-rk3399_defconfig
> > @@ -58,3 +58,4 @@ CONFIG_USB_ETHER_SMSC95XX=y
> >   CONFIG_USE_TINY_PRINTF=y
> >   CONFIG_SPL_TINY_MEMSET=y
> >   CONFIG_ERRNO_STR=y
> > +CONFIG_MISC_INIT_R=y
> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
> 

  reply	other threads:[~2019-07-10 10:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-09 10:37 [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid Rohan Garg
2019-07-10  6:37 ` Kever Yang
2019-07-10 10:03   ` Heiko Stübner [this message]
2019-07-10 12:08     ` Rohan Garg
2019-07-10 12:53       ` Heiko Stübner
2019-07-10 12:07   ` Rohan Garg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2819436.V5PS3U405X@diego \
    --to=heiko@sntech.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox