From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 01/13] mx31: Move EHCI definitions to ehci-fsl.h
Date: Tue, 13 Nov 2012 20:55:30 +0100 (CET) [thread overview]
Message-ID: <288431028.1238905.1352836530889.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1221800138.872097.1352406463706.JavaMail.root@advansee.com>
The EHCI definitions in i.MX31's imx-regs.h are MXC-generic, so move them to
ehci-fsl.h so that all MXC SoCs can use them.
Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
---
Changes for v2: None.
Changes for v3: None.
.../arch/arm/include/asm/arch-mx31/imx-regs.h | 26 --------------------
.../include/usb/ehci-fsl.h | 22 +++++++++++++++++
2 files changed, 22 insertions(+), 26 deletions(-)
diff --git u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h
index 8fd3d08..01a849d 100644
--- u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -896,32 +896,6 @@ struct esdc_regs {
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
-/* USB portsc */
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_TTL_ENABLED (1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 7)
-#define MXC_EHCI_IPPUE_DOWN (1 << 8)
-#define MXC_EHCI_IPPUE_UP (1 << 9)
-
/*
* CSPI register definitions
*/
diff --git u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h u-boot-usb-76454b2/include/usb/ehci-fsl.h
index 2869302..4dee5b0 100644
--- u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h
+++ u-boot-usb-76454b2/include/usb/ehci-fsl.h
@@ -246,9 +246,31 @@ struct usb_ehci {
/*
* For MXC SOCs
*/
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_TTL_ENABLED (1 << 6)
+
#define MXC_EHCI_INTERNAL_PHY (1 << 7)
+#define MXC_EHCI_IPPUE_DOWN (1 << 8)
+#define MXC_EHCI_IPPUE_UP (1 << 9)
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
next prev parent reply other threads:[~2012-11-13 19:55 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-05 20:09 [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-05 20:13 ` [U-Boot] [PATCH 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-05 20:13 ` [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-07 14:30 ` Stefano Babic
2012-11-07 16:16 ` Stefano Babic
2012-11-07 16:27 ` Benoît Thébaudeau
2012-11-07 16:33 ` Stefano Babic
2012-11-05 20:13 ` [U-Boot] [PATCH 13/13] ehci-mx5: Make board_ehci_hcd_init() optional Benoît Thébaudeau
2012-11-05 22:57 ` Marek Vasut
2012-11-05 23:34 ` Benoît Thébaudeau
2012-11-05 22:55 ` [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h Marek Vasut
2012-11-07 16:31 ` Stefano Babic
2012-11-08 20:27 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-08 20:31 ` [U-Boot] [PATCH v2 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-08 20:31 ` [U-Boot] [PATCH v2 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional Benoît Thébaudeau
2012-11-10 7:42 ` [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h Stefano Babic
2012-11-10 12:37 ` Benoît Thébaudeau
2012-11-10 12:46 ` Albert ARIBAUD
2012-11-10 12:47 ` Albert ARIBAUD
2012-11-10 13:51 ` Benoît Thébaudeau
2012-11-10 16:45 ` stefano babic
2012-11-13 19:55 ` Benoît Thébaudeau [this message]
2012-11-13 19:55 ` [U-Boot] [PATCH v3 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-16 8:29 ` Stefano Babic
2012-11-13 19:56 ` [U-Boot] [PATCH v3 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=288431028.1238905.1352836530889.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox