From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/5] usb_storage: Remove EHCI constraints
Date: Thu, 19 Jul 2012 22:17:50 +0200 (CEST) [thread overview]
Message-ID: <291517837.292139.1342729070769.JavaMail.root@advansee.com> (raw)
Now that the EHCI driver allocates its qTDs from the heap, the MSC driver is
only limited by the SCSI commands it uses.
Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
---
.../common/usb_storage.c | 31 +++++++++-----------
1 file changed, 14 insertions(+), 17 deletions(-)
diff --git u-boot-usb-1b4bd0e.orig/common/usb_storage.c u-boot-usb-1b4bd0e/common/usb_storage.c
index bdc306f..46f6b75 100644
--- u-boot-usb-1b4bd0e.orig/common/usb_storage.c
+++ u-boot-usb-1b4bd0e/common/usb_storage.c
@@ -156,10 +156,11 @@ struct us_data {
};
/*
- * The U-Boot EHCI driver cannot handle more than 5 page aligned buffers
- * of 4096 bytes in a transfer without running itself out of qt_buffers
+ * The U-Boot EHCI driver can handle any transfer length as long as there is
+ * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
+ * limited to 65535 bytes.
*/
-#define USB_MAX_XFER_BLK(start, blksz) (((4096 * 5) - (start % 4096)) / blksz)
+#define USB_MAX_XFER_BLK 65535
static struct us_data usb_stor[USB_MAX_STOR_DEV];
@@ -1046,7 +1047,7 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor,
unsigned long usb_stor_read(int device, unsigned long blknr,
unsigned long blkcnt, void *buffer)
{
- unsigned long start, blks, buf_addr, max_xfer_blk;
+ unsigned long start, blks, buf_addr;
unsigned short smallblks;
struct usb_device *dev;
struct us_data *ss;
@@ -1088,14 +1089,12 @@ unsigned long usb_stor_read(int device, unsigned long blknr,
/* XXX need some comment here */
retry = 2;
srb->pdata = (unsigned char *)buf_addr;
- max_xfer_blk = USB_MAX_XFER_BLK(buf_addr,
- usb_dev_desc[device].blksz);
- if (blks > max_xfer_blk)
- smallblks = (unsigned short) max_xfer_blk;
+ if (blks > USB_MAX_XFER_BLK)
+ smallblks = USB_MAX_XFER_BLK;
else
smallblks = (unsigned short) blks;
retry_it:
- if (smallblks == max_xfer_blk)
+ if (smallblks == USB_MAX_XFER_BLK)
usb_show_progress();
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
@@ -1116,7 +1115,7 @@ retry_it:
start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
- if (blkcnt >= max_xfer_blk)
+ if (blkcnt >= USB_MAX_XFER_BLK)
debug("\n");
return blkcnt;
}
@@ -1124,7 +1123,7 @@ retry_it:
unsigned long usb_stor_write(int device, unsigned long blknr,
unsigned long blkcnt, const void *buffer)
{
- unsigned long start, blks, buf_addr, max_xfer_blk;
+ unsigned long start, blks, buf_addr;
unsigned short smallblks;
struct usb_device *dev;
struct us_data *ss;
@@ -1169,14 +1168,12 @@ unsigned long usb_stor_write(int device, unsigned long blknr,
*/
retry = 2;
srb->pdata = (unsigned char *)buf_addr;
- max_xfer_blk = USB_MAX_XFER_BLK(buf_addr,
- usb_dev_desc[device].blksz);
- if (blks > max_xfer_blk)
- smallblks = (unsigned short) max_xfer_blk;
+ if (blks > USB_MAX_XFER_BLK)
+ smallblks = USB_MAX_XFER_BLK;
else
smallblks = (unsigned short) blks;
retry_it:
- if (smallblks == max_xfer_blk)
+ if (smallblks == USB_MAX_XFER_BLK)
usb_show_progress();
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
@@ -1197,7 +1194,7 @@ retry_it:
start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
- if (blkcnt >= max_xfer_blk)
+ if (blkcnt >= USB_MAX_XFER_BLK)
debug("\n");
return blkcnt;
next reply other threads:[~2012-07-19 20:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-19 20:17 Benoît Thébaudeau [this message]
2012-08-09 21:52 ` [U-Boot] [PATCH v3 5/8] usb_storage: Remove EHCI constraints Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=291517837.292139.1342729070769.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox