From: 齐尧 <qiyao@bit.edu.cn>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] I can not drive the cs8900 on mx1ads by u-boot-1.1.1-imx1
Date: Tue, 21 Sep 2004 13:43:21 +0800 [thread overview]
Message-ID: <295745084.04983@eyou.net> (raw)
hi,
I am sorry to send unreadable mail so many times.I want to try again.
Now ,the u-boot can work well ,but the i can not controlethcad cs8900 very well.i can not read the id of cs8900.I have ported the blob to mx1ads ,and i can get the id of cs8900 .now ,i just copy the code in blob to u-boot to get the id of cs8900 ,but i am failed .I do not know why .
the code related to is as follows :
//set CS4U
*(volatile unsigned long*)(0x00220020) = 0x00000F00;
//set CS4L control register
*(volatile unsigned long*)(0x00220024) = 0x80001501;
//set the GPIO muxing to use Chip Select 4
*(volatile unsigned long*)(0x0021C020) &= 0xFF3FFFFF;
*(volatile unsigned long*)(0x0021C038) &= 0xFF3FFFFF;
//the irq is connect to GPIO pin to PortC pin 17
*((volatile unsigned long* ) 0x0021c220)&=~0x00020000;
*((volatile unsigned long*) 0x0021c238)&=~0x00020000;
//send the base address of cs8900 on the ADD Bus
c = *(volatile unsigned char *)(0x15000300);
CS8900_PPTR = regno;
printf("CS8900_PDATA = %x\n",CS8900_PDATA);
the result is always 0x5555,i do not know why,these codes above can work well in blob.
I am looking forward your reply,thank ahead!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ??.vcf
Type: text/x-vcard
Size: 108 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040921/acb23444/attachment.vcf
reply other threads:[~2004-09-21 5:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=295745084.04983@eyou.net \
--to=qiyao@bit.edu.cn \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox