From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Fleming Date: Fri, 10 Sep 2004 11:34:21 -0500 Subject: [U-Boot-Users] FEC and TSEC in MPC8540... In-Reply-To: <4141D216.70001@gdatech.co.in> References: <4141D216.70001@gdatech.co.in> Message-ID: <2acbd3e40409100934d529b0f@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de You cannot ping the bootloader, as far as I know. You can ping from u-boot, but not the other way around. Also, only one interface (TSEC1, TSEC2, or FEC) will be active at any one time, and only while u-boot is executing a network command. On Fri, 10 Sep 2004 21:41:02 +0530, sivam wrote: > Hi All, > > I am trying to use both TSEC and FEC interface in MPC8540 in U-Boot . Is > it possible for me to use both the interface in U-Boot and ping from > outside thro' these 2 interfaces ?. Right now i could use only one > interface i.e TSEC ?. Can anyone shed some light on this. > > Thanks and Regards > sivam > > ------------------------------------------------------- > This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 > Project Admins to receive an Apple iPod Mini FREE for your judgement on > who ports your project to Linux PPC the best. Sponsored by IBM. > Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users >