* Can’t boot FIT kernel image
@ 2021-02-19 8:47 Алексей Беляев
2021-02-19 14:19 ` Sean Anderson
0 siblings, 1 reply; 2+ messages in thread
From: Алексей Беляев @ 2021-02-19 8:47 UTC (permalink / raw)
To: u-boot
Hello!
I'm trying to make FIT Kernel+dtb image for U-Boot.
```
mkimage -E -f Image.its Image.new
```
Image.its:
```
/dts-v1/;
/ {
description = "ARM64 OpenWrt FIT (Flattened Image Tree)";
#address-cells = <1>;
images {
kernel at 1 {
description = "ARM64 OpenWrt Linux-5.4.60";
data = /incbin/("arch/arm64/boot/Image.lzma");
type = "kernel";
arch = "arm64";
os = "linux";
compression = "lzma";
load = <0x40008000>;
entry = <0x40008000>;
hash at 1 {
algo = "crc32";
};
hash at 2 {
algo = "sha1";
};
};
fdt at 1 {
description = "ARM64 OpenWrt
xunlong_orangepi-zero-plus2 device tree blob";
data =
/incbin/("sun50i-h5-orangepi-zero-plus2.dtb");
type = "flat_dt";
arch = "arm64";
compression = "none";
load = <0x4FA00000>;
hash at 1 {
algo = "crc32";
};
hash at 2 {
algo = "sha1";
};
};
};
configurations {
default = "config at 1";
config at 1 {
description = "OpenWRT";
kernel = "kernel at 1";
fdt = "fdt at 1";
};
};
};
```
and it Look like good. U-boot print correct Information about it.
```
U-Boot 2020.04 (Aug 28 2020 - 09:44:29 +0000) Allwinner Technology
CPU: Allwinner H5 (SUN50I)
Model: OrangePi Zero Plus2
DRAM: 512 MiB
MMC: Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=> fatload mmc 0 53E00000 Image.new
3561732 bytes read in 513 ms (6.6 MiB/s)
=> setenv bootargs console=ttyS0,115200 earlyprintk
root=PARTUUID=5452574f-02 rootwait earlycon=uart,mmio32,0x01c28000
=> bootm 53E00000
## Loading kernel from FIT Image at 53e00000 ...
Using 'config at 1' configuration
Trying 'kernel at 1' kernel subimage
Description: ARM64 OpenWrt Linux-5.4.60
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x53e0043c
Data Size: 3537003 Bytes = 3.4 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x40008000
Entry Point: 0x40008000
Hash algo: crc32
Hash value: 1003b68e
Hash algo: sha1
Hash value: 94d9ea6a0f543649d294b50bd2a7bba1857cf538
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 53e00000 ...
Using 'config at 1' configuration
Trying 'fdt at 1' fdt subimage
Description: ARM64 OpenWrt xunlong_orangepi-zero-plus2 device tree
blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x5415fca8
Data Size: 23641 Bytes = 23.1 KiB
Architecture: AArch64
Load Address: 0x4fa00000
Hash algo: crc32
Hash value: fc8daabb
Hash algo: sha1
Hash value: 6c18b66e1c9bb6dfb289701e1a478e294cb3568c
Verifying Hash Integrity ... crc32+ sha1+ OK
Loading fdt from 0x5415fca8 to 0x4fa00000
Booting using the fdt blob at 0x4fa00000
Uncompressing Kernel Image
Loading Device Tree to 0000000049ff7000, end 0000000049fffc58 ... OK
Starting kernel ...
```
And device has freeze.
Kernel and dtb is fine. I have Image.lzma and "dtb" files distinctly and
their work fine:
```
U-Boot 2020.04 (Aug 28 2020 - 09:44:29 +0000) Allwinner Technology
CPU: Allwinner H5 (SUN50I)
Model: OrangePi Zero Plus2
DRAM: 512 MiB
MMC: Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=> load mmc 0 53E00000 Image.lzma
3537067 bytes read in 506 ms (6.7 MiB/s)
=> fatload mmc 0 0x4FA00000 sun50i-h5-orangepi-zero-plus2.dtb
23641 bytes read in 5 ms (4.5 MiB/s)
=> setenv bootargs console=ttyS0,115200 earlyprintk
root=PARTUUID=5452574f-02 rootwait earlycon=uart,mmio32,0x01c28000
=bootm 0x53E00000 - 0x4FA00000
## Booting kernel from Legacy Image at 53e00000 ...
Image Name: Linux
Image Type: AArch64 Linux Kernel Image (lzma compressed)
Data Size: 3537003 Bytes = 3.4 MiB
Load Address: 40080000
Entry Point: 40080000
Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Uncompressing Kernel Image
Loading Device Tree to 0000000049ff7000, end 0000000049fffc58 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.60 (spider at horoshiki.ru) (gcc version
8.4.0 (OpenWrt GCC 8.4.0 r14283-42d14ace3e)) #0 SMP Fri Aug 28 09:44:29
2020
[ 0.000000] Machine model: OrangePi Zero Plus2
```
What I do wrong?
PS. Kernel boot normally by next command:
```
lzmadec 0x53e0043c 0x40008000
imxtract 53e00000 fdt at 1 0x4FA00000
booti 0x40008000 - 0x4FA00000
```
--
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Can’t boot FIT kernel image
2021-02-19 8:47 Can’t boot FIT kernel image Алексей Беляев
@ 2021-02-19 14:19 ` Sean Anderson
0 siblings, 0 replies; 2+ messages in thread
From: Sean Anderson @ 2021-02-19 14:19 UTC (permalink / raw)
To: u-boot
On 2/19/21 3:47 AM, ??????? ?????? wrote:
> Hello!
>
> I'm trying to make FIT Kernel+dtb image for U-Boot.
> ```
> mkimage -E -f Image.its Image.new
> ```
>
> Image.its:
> ```
> /dts-v1/;
>
> / {
> ??????? description = "ARM64 OpenWrt FIT (Flattened Image Tree)";
> ??????? #address-cells = <1>;
>
> ??????? images {
> ??????????????? kernel at 1 {
> ??????????????????????? description = "ARM64 OpenWrt Linux-5.4.60";
> ??????????????????????? data = /incbin/("arch/arm64/boot/Image.lzma");
> ??????????????????????? type = "kernel";
> ??????????????????????? arch = "arm64";
> ??????????????????????? os = "linux";
> ??????????????????????? compression = "lzma";
> ??????????????????????? load = <0x40008000>;
> ??????????????????????? entry = <0x40008000>;
> ??????????????????????? hash at 1 {
> ??????????????????????????????? algo = "crc32";
> ??????????????????????? };
> ??????????????????????? hash at 2 {
> ??????????????????????????????? algo = "sha1";
> ??????????????????????? };
> ??????????????? };
>
> ??????????????? fdt at 1 {
> ??????????????????????? description = "ARM64 OpenWrt xunlong_orangepi-zero-plus2 device tree blob";
> ??????????????????????? data = /incbin/("sun50i-h5-orangepi-zero-plus2.dtb");
> ??????????????????????? type = "flat_dt";
> ??????????????????????? arch = "arm64";
> ??????????????????????? compression = "none";
> ??????????????????????? load = <0x4FA00000>;
> ??????????????????????? hash at 1 {
> ??????????????????????????????? algo = "crc32";
> ??????????????????????? };
> ??????????????????????? hash at 2 {
> ??????????????????????????????? algo = "sha1";
> ??????????????????????? };
> ??????????????? };
>
> ??????? };
>
> ??????? configurations {
> ??????????????? default = "config at 1";
> ??????????????? config at 1 {
> ??????????????????????? description = "OpenWRT";
> ??????????????????????? kernel = "kernel at 1";
> ??????????????????????? fdt = "fdt at 1";
> ??????????????? };
> ??????? };
> };
> ```
>
> and it Look like good. U-boot print correct Information about it.
>
> ```
> U-Boot 2020.04 (Aug 28 2020 - 09:44:29 +0000) Allwinner Technology
>
> CPU:?? Allwinner H5 (SUN50I)
> Model: OrangePi Zero Plus2
> DRAM:? 512 MiB
> MMC:?? Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
> mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
>
> In:??? serial
> Out:?? serial
> Err:?? serial
> Hit any key to stop autoboot:? 0
> => fatload mmc 0 53E00000 Image.new
> 3561732 bytes read in 513 ms (6.6 MiB/s)
> => setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=5452574f-02 rootwait earlycon=uart,mmio32,0x01c28000
> => bootm 53E00000
> ## Loading kernel from FIT Image at 53e00000 ...
> ?? Using 'config at 1' configuration
> ?? Trying 'kernel at 1' kernel subimage
> ???? Description:? ARM64 OpenWrt Linux-5.4.60
> ???? Type:???????? Kernel Image
> ???? Compression:? lzma compressed
> ???? Data Start:?? 0x53e0043c
> ???? Data Size:??? 3537003 Bytes = 3.4 MiB
> ???? Architecture: AArch64
> ???? OS:?????????? Linux
> ???? Load Address: 0x40008000
Here it is 40008000
> ???? Entry Point:? 0x40008000
> ???? Hash algo:??? crc32
> ???? Hash value:?? 1003b68e
> ???? Hash algo:??? sha1
> ???? Hash value:?? 94d9ea6a0f543649d294b50bd2a7bba1857cf538
> ?? Verifying Hash Integrity ... crc32+ sha1+ OK
> ## Loading fdt from FIT Image at 53e00000 ...
> ?? Using 'config at 1' configuration
> ?? Trying 'fdt at 1' fdt subimage
> ???? Description:? ARM64 OpenWrt xunlong_orangepi-zero-plus2 device tree blob
> ???? Type:???????? Flat Device Tree
> ???? Compression:? uncompressed
> ???? Data Start:?? 0x5415fca8
> ???? Data Size:??? 23641 Bytes = 23.1 KiB
> ???? Architecture: AArch64
> ???? Load Address: 0x4fa00000
> ???? Hash algo:??? crc32
> ???? Hash value:?? fc8daabb
> ???? Hash algo:??? sha1
> ???? Hash value:?? 6c18b66e1c9bb6dfb289701e1a478e294cb3568c
> ?? Verifying Hash Integrity ... crc32+ sha1+ OK
> ?? Loading fdt from 0x5415fca8 to 0x4fa00000
> ?? Booting using the fdt blob at 0x4fa00000
> ?? Uncompressing Kernel Image
> ?? Loading Device Tree to 0000000049ff7000, end 0000000049fffc58 ... OK
>
> Starting kernel ...
> ```
> And device has freeze.
>
> Kernel and dtb is fine. I have Image.lzma and "dtb" files distinctly and their work fine:
> ```
> U-Boot 2020.04 (Aug 28 2020 - 09:44:29 +0000) Allwinner Technology
>
> CPU:?? Allwinner H5 (SUN50I)
> Model: OrangePi Zero Plus2
> DRAM:? 512 MiB
> MMC:?? Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
> mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
>
> In:??? serial
> Out:?? serial
> Err:?? serial
> Hit any key to stop autoboot:? 0
> => load mmc 0 53E00000 Image.lzma
> 3537067 bytes read in 506 ms (6.7 MiB/s)
> => fatload mmc 0 0x4FA00000 sun50i-h5-orangepi-zero-plus2.dtb
> 23641 bytes read in 5 ms (4.5 MiB/s)
> => setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=5452574f-02 rootwait earlycon=uart,mmio32,0x01c28000
> =bootm 0x53E00000 - 0x4FA00000
> ## Booting kernel from Legacy Image at 53e00000 ...
> ?? Image Name:?? Linux
> ?? Image Type:?? AArch64 Linux Kernel Image (lzma compressed)
> ?? Data Size:??? 3537003 Bytes = 3.4 MiB
> ?? Load Address: 40080000
but here it is 40080000. Which one is correct?
--Sean
> ?? Entry Point:? 40080000
> ?? Verifying Checksum ... OK
> ## Flattened Device Tree blob at 4fa00000
> ?? Booting using the fdt blob at 0x4fa00000
> ?? Uncompressing Kernel Image
> ?? Loading Device Tree to 0000000049ff7000, end 0000000049fffc58 ... OK
>
> Starting kernel ...
>
> [??? 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> [??? 0.000000] Linux version 5.4.60 (spider at horoshiki.ru) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14283-42d14ace3e)) #0 SMP Fri Aug 28 09:44:29 2020
> [??? 0.000000] Machine model: OrangePi Zero Plus2
> ```
>
> What I do wrong?
>
> PS. Kernel boot normally by next command:
> ```
> lzmadec 0x53e0043c 0x40008000
> imxtract 53e00000 fdt at 1 0x4FA00000
> booti 0x40008000 - 0x4FA00000
> ```
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-19 14:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-02-19 8:47 Can’t boot FIT kernel image Алексей Беляев
2021-02-19 14:19 ` Sean Anderson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox