From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig
Date: Thu, 28 Feb 2019 22:27:14 +0100 [thread overview]
Message-ID: <2efec410-c162-e342-e233-e448640824d3@denx.de> (raw)
In-Reply-To: <20190228203348.28424-2-simon.k.r.goldschmidt@gmail.com>
On 2/28/19 9:33 PM, Simon Goldschmidt wrote:
> Instead of fixing the SPL stack to 64 KiB in the board config header via
> CONFIG_SYS_SPL_MALLOC_SIZE, let's just use CONFIG_SPL_SYS_MALLOC_F_LEN
> in the defconfig.
>
> This also has the advandage that it removes sub-mach specific ifdefs in
> socfpga_common.h.
>
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Can't we default these stack sizes with imply in Kconfig files instead ?
Then they won't have to be in the defconfigs either.
> ---
>
> configs/socfpga_arria10_defconfig | 1 +
> include/configs/socfpga_common.h | 14 --------------
> 2 files changed, 1 insertion(+), 14 deletions(-)
>
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index f321a0ac3b..8d0479cc05 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
> CONFIG_ARCH_SOCFPGA=y
> CONFIG_SYS_TEXT_BASE=0x01000040
> CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
> CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
> CONFIG_SPL=y
> CONFIG_IDENT_STRING="socfpga_arria10"
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index a3fbca0a5d..c23b34186a 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -251,16 +251,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
> #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
>
> -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -/* SPL memory allocation configuration, this is for FAT implementation */
> -#ifndef CONFIG_SYS_SPL_MALLOC_START
> -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
> -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \
> - CONFIG_SYS_SPL_MALLOC_SIZE + \
> - CONFIG_SYS_INIT_RAM_ADDR)
> -#endif
> -#endif
> -
> /* SPL SDMMC boot support */
> #ifdef CONFIG_SPL_MMC_SUPPORT
> #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
> @@ -287,11 +277,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> /*
> * Stack setup
> */
> -#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -#define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START
> -#endif
>
> /* Extra Environment */
> #ifndef CONFIG_SPL_BUILD
>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2019-02-28 21:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 20:33 [U-Boot] [PATCH 1/3] arm: socfpga: fix comment about SPL memory layout Simon Goldschmidt
2019-02-28 20:33 ` [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig Simon Goldschmidt
2019-02-28 21:27 ` Marek Vasut [this message]
2019-03-01 7:48 ` Simon Goldschmidt
2019-03-01 11:40 ` Marek Vasut
2019-02-28 20:33 ` [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR Simon Goldschmidt
2019-02-28 21:30 ` Marek Vasut
2019-03-01 7:55 ` Simon Goldschmidt
2019-03-01 11:42 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2efec410-c162-e342-e233-e448640824d3@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox