[U-Boot] [PATCH v4 1/7] arm: socfpga: add env settings to common header

[Dinh Nguyen <dinguyen@kernel.org>]

On 01/24/2017 11:05 AM, Dalon Westergreen wrote:
> From: Dalon Westergreen <dalon.westergreen@intel.com>
> 
> Move repeated environment settings for socfpga boards
> to a common header.
> 
> The default values for the boot partition and the
> OS filesystem partition have changed and as
> as result the default uboot environment for socfpga
> boards needs updating.
> 
> Move to using  CONFIG_DEFAULT_DEVICE_TREE for setting the
> default linux devicetree used during linux boot.
> 
> Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
> ---
>  include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index 6285266..bdd6e2f 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>   * Stack setup
>   */
>  #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> +	
> +/* Extra Environment */
> +#ifndef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"verify=n\0" \
> +	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> +	"bootimage=" CONFIG_BOOTFILE "\0" \
> +	"fdt_addr=100\0" \
> +	"fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \
> +	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
> +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> +	"mmcroot=/dev/mmcblk0p3\0" \

Should this be mmcblk0p2?

Dinh