From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Date: Fri, 5 Apr 2013 19:32:54 +0200 (CEST) [thread overview]
Message-ID: <30209879.1303556.1365183174121.JavaMail.root@advansee.com> (raw)
In-Reply-To: <20130405160030.GG32357@bill-the-cat>
Hi Tom,
On Friday, April 5, 2013 6:00:30 PM, Tom Rini wrote:
> On Fri, Apr 05, 2013 at 03:56:46PM +0200, Beno??t Th??baudeau wrote:
> > Hi Albert,
> >
> > On Friday, April 5, 2013 8:00:43 AM, Albert ARIBAUD wrote:
> > > Hi Beno??t,
> [snip]
> > > IIUC, this future patch would increase the limit for SPL run-time size,
> > > as the constant against which the ASS tests __bss_end for would
> > > necessarily be greater than it is now. Correct? If so, this future
> > > patch should not break any target, as it would loosen the constraint,
> > > not tighten it.
> >
> > Yes, it would either be the same or relaxed a bit, depending on the chosen
> > option:
> > - Define CONFIG_SPL_BSS_MAX_SIZE and test against CONFIG_SPL_MAX_SIZE +
> > CONFIG_SPL_BSS_MAX_SIZE, the sum remaining the same as or being larger
> > than
> > currently, depending on the new values for CONFIG_SPL_MAX_SIZE and
> > CONFIG_SPL_BSS_MAX_SIZE.
> > - Define a new config meaning text + data + rodata + bss (e.g.
> > CONFIG_SPL_MAX_RAM_SIZE or CONFIG_SPL_MAX_MEM_FOOTPRINT), and just
> > replace
> > CONFIG_SPL_MAX_SIZE with it for the users of arch/arm/cpu/u-boot*.lds,
> > taking
> > care that this was the only meaning those users were giving to
> > CONFIG_SPL_MAX_SIZE.
> >
> > The first option would probably be preferable, using the same value for
> > CONFIG_SPL_MAX_SIZE, and a non-zero value for CONFIG_SPL_BSS_MAX_SIZE.
>
> I think the problem is that Tegra really needs the second case as their
> constraint is "must fit below next part of payload". We can assume the
> users of that linker script today care about footprint and update their
> define I believe. da850evm and the rest of the davinci platforms would
> also be a case to convert to this, but the omap*/am3* platforms would
> not.
Yes, then let's have an assert in arch/arm/cpu/u-boot*.lds with a different
config name (as in option 2 above) just for Tegra, and another assert for
CONFIG_SPL_MAX_SIZE against __bss_start.
And all users of CONFIG_SPL_MAX_SIZE should be checked to make sure that there
is not another special case somewhere.
Best regards,
Beno?t
next prev parent reply other threads:[~2013-04-05 17:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-04 22:13 [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts Albert ARIBAUD
2013-04-04 23:05 ` Benoît Thébaudeau
2013-04-04 23:13 ` Benoît Thébaudeau
2013-04-04 23:54 ` Albert ARIBAUD
2013-04-05 3:44 ` Benoît Thébaudeau
2013-04-05 6:00 ` Albert ARIBAUD
2013-04-05 13:53 ` Tom Rini
2013-04-05 15:59 ` Stephen Warren
2013-04-11 17:52 ` Tom Warren
2013-04-11 17:59 ` Albert ARIBAUD
2013-04-11 18:13 ` Tom Warren
2013-04-05 13:56 ` Benoît Thébaudeau
2013-04-05 16:00 ` Tom Rini
2013-04-05 17:32 ` Benoît Thébaudeau [this message]
2013-04-05 17:55 ` Tom Rini
2013-04-05 19:17 ` Albert ARIBAUD
2013-04-05 19:28 ` Albert ARIBAUD
2013-04-05 19:44 ` Tom Rini
2013-04-05 20:04 ` Albert ARIBAUD
2013-04-05 20:23 ` Tom Rini
2013-04-08 19:03 ` Albert ARIBAUD
2013-04-08 19:56 ` Tom Rini
2013-04-08 20:05 ` Albert ARIBAUD
2013-04-04 23:12 ` Albert ARIBAUD
2013-04-11 15:30 ` Albert ARIBAUD
2013-04-11 15:43 ` [U-Boot] [PATCH V2] " Albert ARIBAUD
2013-04-12 16:34 ` Albert ARIBAUD
2013-04-13 21:16 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30209879.1303556.1365183174121.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox