From mboxrd@z Thu Jan  1 00:00:00 1970
From: Paula S <gnathita@gmail.com>
Date: Tue, 7 Mar 2006 03:20:07 -0800 (PST)
Subject: [U-Boot-Users] Xilinx ML403/PPC U-Boot support
In-Reply-To: <17388.1463.523893.892375@waldo.lisle.iphase.com>
References: <43D9E2AB.5020108@sbcglobal.net> <43DEFF49.9090909@xilinx.com> <17386.45657.426834.355460@waldo.lisle.iphase.com> <43EAC1E7.4040309@xilinx.com> <17388.1463.523893.892375@waldo.lisle.iphase.com>
Message-ID: <3278946.post@talk.nabble.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi!

I'm using the ml403 as well, trying to boot from Flash, without SysACE. But
when I load u-boot, I get the message: 
### No HW ID - assuming ML403
DRAM:  64 MB
FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
*** failed ***
### ERROR ### Please RESET the board ###

The flash address is ok in hw design.

Any help would be appreciated.
Thanks!
Paula

--
View this message in context: http://www.nabble.com/Sequence-of-Xilinx-ML403-PPC-t1009012.html#a3278946
Sent from the Uboot - Users forum at Nabble.com.