From: "Heiko Stübner" <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/8] rockchip: rk3188: add core support
Date: Fri, 22 Jul 2016 23:54:33 +0200 [thread overview]
Message-ID: <3453180.SlQqvEWZDG@diego> (raw)
In-Reply-To: <1469224272-17220-8-git-send-email-heiko@sntech.de>
Am Freitag, 22. Juli 2016, 23:51:11 schrieb Heiko Stuebner:
> Add the core architecture code for the rk3188.
> It doesn't support the SPL yet, as because of some
> unknown error it doesn't start yet.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> arch/arm/dts/rk3188.dtsi | 631
> ++++++++++++++++++++++++++ arch/arm/dts/rk3xxx.dtsi |
> 431 ++++++++++++++++++ arch/arm/mach-rockchip/Kconfig | 11
> +
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rk3188/Kconfig | 9 +
> arch/arm/mach-rockchip/rk3188/Makefile | 9 +
> arch/arm/mach-rockchip/rk3188/clk_rk3188.c | 17 +
> arch/arm/mach-rockchip/rk3188/reset_rk3188.c | 47 ++
> arch/arm/mach-rockchip/rk3188/syscon_rk3188.c | 24 +
> include/configs/rk3188_common.h | 95 ++++
> tools/rkcommon.c | 1 +
> 11 files changed, 1276 insertions(+)
> create mode 100644 arch/arm/dts/rk3188.dtsi
> create mode 100644 arch/arm/dts/rk3xxx.dtsi
> create mode 100644 arch/arm/mach-rockchip/rk3188/Kconfig
> create mode 100644 arch/arm/mach-rockchip/rk3188/Makefile
> create mode 100644 arch/arm/mach-rockchip/rk3188/clk_rk3188.c
> create mode 100644 arch/arm/mach-rockchip/rk3188/reset_rk3188.c
> create mode 100644 arch/arm/mach-rockchip/rk3188/syscon_rk3188.c
> create mode 100644 include/configs/rk3188_common.h
>
> diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
> new file mode 100644
> index 0000000..ef1b962
> --- /dev/null
> +++ b/arch/arm/dts/rk3188.dtsi
> @@ -0,0 +1,631 @@
> +/*
> + * Copyright (c) 2013 MundoReader S.L.
> + * Author: Heiko Stuebner <heiko@sntech.de>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
it seems I forgot more license-header conversions in these new two patches.
Sorry about that.
Heiko
next prev parent reply other threads:[~2016-07-22 21:54 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-22 21:51 [U-Boot] [PATCH v2 0/8] basic rockchip rk3188 support Heiko Stuebner
2016-07-22 21:51 ` [U-Boot] [PATCH v2 1/8] rockchip: move clock drivers into a subdirectory Heiko Stuebner
2016-07-23 2:08 ` Simon Glass
2016-07-22 21:51 ` [U-Boot] [PATCH v2 2/8] rockchip: remove log2 reimplementation from clock drivers Heiko Stuebner
2016-07-23 2:08 ` Simon Glass
2016-07-22 21:51 ` [U-Boot] [PATCH v2 3/8] rockchip: rk3188: Add header files for PMU and GRF Heiko Stuebner
2016-07-22 21:51 ` [U-Boot] [PATCH v2 4/8] rockchip: rk3188: Add pinctrl driver Heiko Stuebner
2016-07-22 21:51 ` [U-Boot] [PATCH v2 5/8] rockchip: rk3188: Bring in rk3066/rk3188 clock bindings Heiko Stuebner
2016-07-23 2:08 ` Simon Glass
2016-07-22 21:51 ` [U-Boot] [PATCH v2 6/8] rockchip: rk3188: Add clock driver Heiko Stuebner
2016-07-23 2:08 ` Simon Glass
2016-07-22 21:51 ` [U-Boot] [PATCH v2 7/8] rockchip: rk3188: add core support Heiko Stuebner
2016-07-22 21:54 ` Heiko Stübner [this message]
2016-07-23 2:08 ` Simon Glass
2016-07-22 21:51 ` [U-Boot] [PATCH v2 8/8] rockchip: rk3188: Radxa Rock board Heiko Stuebner
2016-07-23 2:08 ` Simon Glass
2016-07-28 3:42 ` [U-Boot] [PATCH v2 0/8] basic rockchip rk3188 support Simon Glass
2016-07-28 10:34 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3453180.SlQqvEWZDG@diego \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox