From: Nih_a <niharika@embeddedwireless.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] fw_printenv is not working
Date: Sun, 21 Oct 2012 21:13:43 -0700 (PDT) [thread overview]
Message-ID: <34585226.post@talk.nabble.com> (raw)
In-Reply-To: <29297562.post@talk.nabble.com>
Hi Mateer,
I am also facing the same issue. I am also getting the error:
fw_printenv: line 1: syntax error: "(" unexpected
whenever I give command fw_printenv. I am using OMAPL138 EVM board.
Can u please help me... How did you resolve this error for your board??
Thanks in advance...
Nih_a
mateer wrote:
>
> Hi,
> when i run fw_printenv , its not working..It shows:- fw_printenv: line
> 1: syntax error: "(" unexpected error... Let me tell you what i did...
> 1) i copy the u-boot source code from my colleague and copy in my hard
> disk.
> 2) After then i set the environment through commnads. the commands which i
> run are
> # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean
> # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3_evm_config
> # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm
> 3) After then i go to /tools/env, where i configure the fw_env.config and
> then run make command.
> 4) After ruuning the command i got crc32.c and fw_printenv.
> 5)i copied the fw_printenv into the SD-Card and insert the card into the
> OMAP3EVM board.
> 6) after then when i use the command ./fw_printenv it throws the error
> fw_printenv: line 1: syntax error: "(" unexpected error..
> Can u please help me what i have to do... I think i am doing
> something wrong...
>
>
--
View this message in context: http://old.nabble.com/fw_printenv-is-not-working-tp29297562p34585226.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
next prev parent reply other threads:[~2012-10-22 4:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-29 15:21 [U-Boot] fw_printenv is not working mateer
2010-07-29 15:24 ` Mike Frysinger
2012-10-22 4:13 ` Nih_a [this message]
2012-10-22 13:19 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2010-07-29 15:22 mateer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=34585226.post@talk.nabble.com \
--to=niharika@embeddedwireless.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox