From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] mx5: Use default pin initializers
Date: Tue, 14 Aug 2012 17:47:06 +0200 (CEST) [thread overview]
Message-ID: <361685095.2404818.1344959226091.JavaMail.root@advansee.com> (raw)
In-Reply-To: <883852451.2404814.1344959214390.JavaMail.root@advansee.com>
Use the newly created mx5 default pin initialization functions in mx5 board
files.
Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
---
.../board/efikamx/efikamx.c | 133 ++------------------
.../board/freescale/mx51evk/mx51evk.c | 121 +-----------------
.../board/ttcontrol/vision2/vision2.c | 72 +----------
3 files changed, 15 insertions(+), 311 deletions(-)
diff --git u-boot-4d3c95f.orig/board/efikamx/efikamx.c u-boot-4d3c95f/board/efikamx/efikamx.c
index e88b2ed..6810433 100644
--- u-boot-4d3c95f.orig/board/efikamx/efikamx.c
+++ u-boot-4d3c95f/board/efikamx/efikamx.c
@@ -143,38 +143,12 @@ int dram_init(void)
}
/*
- * UART configuration
- */
-static void setup_iomux_uart(void)
-{
- unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
-
- mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
- mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
-}
-
-/*
* SPI configuration
*/
#ifdef CONFIG_MXC_SPI
static void setup_iomux_spi(void)
{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mx51_ecspi1_init_pins();
/* Configure SS0 as a GPIO */
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO);
@@ -183,16 +157,6 @@ static void setup_iomux_spi(void)
/* Configure SS1 as a GPIO */
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO);
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
-
- /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
}
#else
static inline void setup_iomux_spi(void) { }
@@ -333,7 +297,12 @@ int board_mmc_init(bd_t *bis)
int ret;
uint32_t cd = efika_mmc_cd();
- /* SDHC1 is used on all revisions, setup control pins first */
+ /* SDHC1 is used on all revisions */
+
+ /* SDHC1 IOMUX */
+ mx51_esdhc1_init_pins();
+
+ /* SDHC1 Control lines IOMUX */
mxc_request_iomux(cd,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(cd,
@@ -354,65 +323,8 @@ int board_mmc_init(bd_t *bis)
/* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
if (machine_is_efikasb() || (machine_is_efikamx() &&
(get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
- /* SDHC1 IOMUX */
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
-
/* SDHC2 IOMUX */
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
+ mx51_esdhc2_init_pins();
/* SDHC2 Control lines IOMUX */
mxc_request_iomux(MX51_PIN_GPIO1_7,
@@ -436,33 +348,6 @@ int board_mmc_init(bd_t *bis)
if (!ret)
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
} else { /* New boards use only SDHC1 */
- /* SDHC1 IOMUX */
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
- mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
-
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
@@ -676,7 +561,7 @@ int board_early_init_f(void)
{
init_drive_strength();
- setup_iomux_uart();
+ mx51_uart1_init_pins();
setup_iomux_spi();
setup_iomux_led();
diff --git u-boot-4d3c95f.orig/board/freescale/mx51evk/mx51evk.c u-boot-4d3c95f/board/freescale/mx51evk/mx51evk.c
index 514a7ac..dedfb7e 100644
--- u-boot-4d3c95f.orig/board/freescale/mx51evk/mx51evk.c
+++ u-boot-4d3c95f/board/freescale/mx51evk/mx51evk.c
@@ -60,21 +60,6 @@ int dram_init(void)
return 0;
}
-static void setup_iomux_uart(void)
-{
- unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
-
- mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
- mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
-}
-
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
@@ -153,29 +138,11 @@ static void setup_iomux_fec(void)
#ifdef CONFIG_MXC_SPI
static void setup_iomux_spi(void)
{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
-
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
+ mx51_ecspi1_init_pins();
/* de-select SS1 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
-
- /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
-
- /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
}
#endif
@@ -354,90 +321,10 @@ int board_mmc_init(bd_t *bis)
index++) {
switch (index) {
case 0:
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
- PAD_CTL_HYS_ENABLE);
- mxc_request_iomux(MX51_PIN_GPIO1_1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
- PAD_CTL_HYS_ENABLE);
+ mx51_esdhc1_init_pins();
break;
case 1:
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD2_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD2_DATA0,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA1,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA2,
- IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_SD2_DATA3,
- IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
- PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_SD2_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mx51_esdhc2_init_pins();
mxc_request_iomux(MX51_PIN_GPIO1_6,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
@@ -509,7 +396,7 @@ void lcd_enable(void)
int board_early_init_f(void)
{
- setup_iomux_uart();
+ mx51_uart1_init_pins();
setup_iomux_fec();
#ifdef CONFIG_USB_EHCI_MX5
setup_usb_h1();
diff --git u-boot-4d3c95f.orig/board/ttcontrol/vision2/vision2.c u-boot-4d3c95f/board/ttcontrol/vision2/vision2.c
index d68bef7..a96c475 100644
--- u-boot-4d3c95f.orig/board/ttcontrol/vision2/vision2.c
+++ u-boot-4d3c95f/board/ttcontrol/vision2/vision2.c
@@ -182,21 +182,7 @@ static void setup_uart(void)
#ifdef CONFIG_MXC_SPI
void spi_io_init(void)
{
- /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
- mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
- PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mx51_ecspi1_init_pins();
/*
* SS1 will be used as GPIO because of uninterrupted
@@ -212,11 +198,6 @@ void spi_io_init(void)
mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
- mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
- mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
- PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
}
static void reset_peripherals(int reset)
@@ -539,56 +520,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc)
#ifdef CONFIG_FSL_ESDHC
int board_mmc_init(bd_t *bis)
{
- mxc_request_iomux(MX51_PIN_SD1_CMD,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_CLK,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA2,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_request_iomux(MX51_PIN_SD1_DATA3,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
- PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
- PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
- PAD_CTL_PUE_PULL |
- PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
- mxc_request_iomux(MX51_PIN_GPIO1_0,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
- PAD_CTL_HYS_ENABLE);
- mxc_request_iomux(MX51_PIN_GPIO1_1,
- IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
- PAD_CTL_HYS_ENABLE);
+ mx51_esdhc1_init_pins();
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
next prev parent reply other threads:[~2012-08-14 15:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 15:46 [U-Boot] [PATCH 1/2] mx5: Add default pin initializers Benoît Thébaudeau
2012-08-14 15:47 ` Benoît Thébaudeau [this message]
2012-08-15 14:37 ` [U-Boot] [PATCH 2/2] mx5: Use " Benoît Thébaudeau
2012-08-16 19:46 ` Matt Sealey
2012-08-16 20:09 ` Benoît Thébaudeau
2012-08-16 21:25 ` Matt Sealey
2012-08-16 22:51 ` Benoît Thébaudeau
2012-08-17 18:53 ` Matt Sealey
2012-08-17 19:26 ` Benoît Thébaudeau
2012-08-17 21:08 ` Stefano Babic
2012-08-16 20:19 ` Marek Vasut
2012-08-17 19:10 ` [U-Boot] [PATCH 1/2] mx5: Add " Matt Sealey
2012-08-17 19:40 ` Benoît Thébaudeau
2012-08-17 20:25 ` Stefano Babic
2012-08-17 20:38 ` Matt Sealey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=361685095.2404818.1344959226091.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox