From: Schwarz,Andre <andre.schwarz@matrix-vision.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] [MPC837x v2] Make it work again with USB.
Date: Mon, 29 Nov 2010 08:59:21 +0100 (CET) [thread overview]
Message-ID: <378632743.6.1291017561200.JavaMail.open-xchange@proteus> (raw)
In-Reply-To: <20101128091038.bdcf8fd0.kim.phillips@freescale.com>
Kim,
> On Tue, 16 Nov 2010 13:37:50 +0100
> Andre Schwarz <andre.schwarz@matrix-vision.de> wrote:
>
> > USB register range IMMR+0x00-0xff is reserved and hangs the CPU.
> >
> > Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
> > ---
>
> nack, 837x has a usb controller at IMMR+0x23000.?
yes - but offset 0x00-0xff is explicitly reserved regarding to the manual.
Don't know whether it is a "should not" or "must not be touched".
?
All I can see is a CPU hang with arbiter event register reporting a timeout on
0xe0023000.
?
? Check to see whether there is an invalid USB clock setting in the SCCR??
All clocks are turned on except SEC and 2nd TSEC.
?
After all USB is running fine with this patch, i.e. there can hardly be a
missing clock.
Please re-think you NAK.
?
--
Gru?,
Andr? Schwarz
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
next prev parent reply other threads:[~2010-11-29 7:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-16 12:37 [U-Boot] [PATCH] [MPC837x v2] Make it work again with USB Andre Schwarz
2010-11-28 15:10 ` Kim Phillips
2010-11-29 7:59 ` Schwarz, Andre [this message]
2010-12-13 22:52 ` Kim Phillips
2011-02-28 16:18 ` Andre Schwarz
2011-03-31 1:14 ` Kim Phillips
2011-03-31 7:52 ` Andre Schwarz
2011-04-01 21:53 ` [U-Boot] [PATCH] mpc83xx: restrict UTMI PHY configuration to 831x parts Kim Phillips
2011-04-04 10:52 ` Andre Schwarz
2011-04-05 1:26 ` Kim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=378632743.6.1291017561200.JavaMail.open-xchange@proteus \
--to=andre.schwarz@matrix-vision.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox