* [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288
@ 2026-01-11 16:27 Johan Jonker
2026-01-11 16:30 ` [PATCH v2 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron Johan Jonker
` (6 more replies)
0 siblings, 7 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:27 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
The device tree for rk3288 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3288 boards.
Clean up MAINTAINERS.
Changed V2:
Rebase
Moved upstream changes to separate patches
Split in smaller pieces
Johan Jonker (6):
ARM: dts: rockchip: Remove mshc aliases from RK3288
ARM: dts: rockchip: Add spi_flash label to rk3288-veyron
ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288
rockchip: Switch rk3288-veyron boards to upstream devicetree
rockchip: Switch remaining rk3288 boards to upstream devicetree
rockchip: imply OF_UPSTREAM for rk3288 boards
arch/arm/dts/cros-ec-sbs.dtsi | 52 --
...boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} | 0
arch/arm/dts/rk3288-evb.dts | 20 -
arch/arm/dts/rk3288-evb.dtsi | 476 -----------
arch/arm/dts/rk3288-popmetal.dts | 20 -
arch/arm/dts/rk3288-popmetal.dtsi | 547 ------------
arch/arm/dts/rk3288-rock-pi-n8.dts | 17 -
arch/arm/dts/rk3288-rock2-som.dtsi | 278 ------
arch/arm/dts/rk3288-rock2-square.dts | 181 ----
arch/arm/dts/rk3288-veyron-chromebook.dtsi | 205 -----
arch/arm/dts/rk3288-veyron-jerry.dts | 208 -----
arch/arm/dts/rk3288-veyron-mickey.dts | 266 ------
arch/arm/dts/rk3288-veyron-minnie.dts | 302 -------
arch/arm/dts/rk3288-veyron-speedy.dts | 143 ----
arch/arm/dts/rk3288-veyron.dtsi | 795 ------------------
arch/arm/dts/rk3288-vmarc-som.dtsi | 361 --------
arch/arm/dts/rk3288-vyasa.dts | 473 -----------
.../dts/rockchip-radxa-dalang-carrier.dtsi | 137 ---
arch/arm/mach-rockchip/Kconfig | 1 +
board/amarula/vyasa-rk3288/MAINTAINERS | 1 -
board/chipspark/popmetal_rk3288/MAINTAINERS | 1 -
board/google/veyron/MAINTAINERS | 10 +-
board/radxa/rock2/MAINTAINERS | 1 -
board/rockchip/evb_rk3288/MAINTAINERS | 6 +-
configs/chromebit_mickey_defconfig | 4 +-
configs/chromebook_jerry_defconfig | 4 +-
configs/chromebook_minnie_defconfig | 4 +-
configs/chromebook_speedy_defconfig | 4 +-
...8_defconfig => evb-rk3288-rk808_defconfig} | 4 +-
configs/firefly-rk3288_defconfig | 1 -
configs/miqi-rk3288_defconfig | 1 -
configs/phycore-rk3288_defconfig | 3 +-
configs/popmetal-rk3288_defconfig | 4 +-
configs/rock-pi-n8-rk3288_defconfig | 2 +-
configs/rock2_defconfig | 4 +-
configs/tinker-rk3288_defconfig | 1 -
configs/tinker-s-rk3288_defconfig | 1 -
configs/vyasa-rk3288_defconfig | 4 +-
doc/board/rockchip/rockchip.rst | 8 +-
.../src/arm/rockchip/rk3288-veyron.dtsi | 2 +-
dts/upstream/src/arm/rockchip/rk3288.dtsi | 9 +-
41 files changed, 30 insertions(+), 4531 deletions(-)
delete mode 100644 arch/arm/dts/cros-ec-sbs.dtsi
rename arch/arm/dts/{rk3288-evb-u-boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} (100%)
delete mode 100644 arch/arm/dts/rk3288-evb.dts
delete mode 100644 arch/arm/dts/rk3288-evb.dtsi
delete mode 100644 arch/arm/dts/rk3288-popmetal.dts
delete mode 100644 arch/arm/dts/rk3288-popmetal.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock-pi-n8.dts
delete mode 100644 arch/arm/dts/rk3288-rock2-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock2-square.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-chromebook.dtsi
delete mode 100644 arch/arm/dts/rk3288-veyron-jerry.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-mickey.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-minnie.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-speedy.dts
delete mode 100644 arch/arm/dts/rk3288-veyron.dtsi
delete mode 100644 arch/arm/dts/rk3288-vmarc-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-vyasa.dts
delete mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
rename configs/{evb-rk3288_defconfig => evb-rk3288-rk808_defconfig} (95%)
--
2.39.5
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
@ 2026-01-11 16:30 ` Johan Jonker
2026-01-11 16:30 ` [PATCH v2 3/6] ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288 Johan Jonker
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:30 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
The u-boot,spl-boot-order property requires a label at a boot
device node. In order to migrate to OF_UPSTREAM more easier
add a spi_flash label to the rk3288-veyron.dtsi file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/8a423a6f-bfdc-4947-aef9-35ee7c4f6ca2@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: ac7116a626e00d3024adedb43b74bdf2ce45efc2 ]
(cherry picked from commit 38e6f7cd300f66cc9f657cd0e8881a01acc664d0)
---
dts/upstream/src/arm/rockchip/rk3288-veyron.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/dts/upstream/src/arm/rockchip/rk3288-veyron.dtsi b/dts/upstream/src/arm/rockchip/rk3288-veyron.dtsi
index 260d6c92cfd1..2d6cf08d00f9 100644
--- a/dts/upstream/src/arm/rockchip/rk3288-veyron.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3288-veyron.dtsi
@@ -388,7 +388,7 @@
rx-sample-delay-ns = <12>;
- flash@0 {
+ spi_flash: flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/6] ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
2026-01-11 16:30 ` [PATCH v2 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron Johan Jonker
@ 2026-01-11 16:30 ` Johan Jonker
2026-01-11 16:31 ` [PATCH v2 4/6] rockchip: Switch rk3288-veyron boards to upstream devicetree Johan Jonker
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:30 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
The rk3288 power-controller node contains an assigned-clocks property
that conflicts with the bindings. From the git history it shows that they
wanted to assign the rk3288 EDP_24M clock input centrally before an edp
node was available. Move the edp assigned-clocks property to the edp node
to reduce dtbs_check output.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/7d6fa223-ab90-4c44-9180-54df78467ea5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 10712ce694a67304a99dbba20f8cb146ca5f4fd6 ]
(cherry picked from commit e1b4137b6bbc9998b13cde2eba0655cfdd358c69)
---
dts/upstream/src/arm/rockchip/rk3288.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/dts/upstream/src/arm/rockchip/rk3288.dtsi b/dts/upstream/src/arm/rockchip/rk3288.dtsi
index 7e284b4fecdc..7477fc5da3ec 100644
--- a/dts/upstream/src/arm/rockchip/rk3288.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3288.dtsi
@@ -741,9 +741,6 @@
#address-cells = <1>;
#size-cells = <0>;
- assigned-clocks = <&cru SCLK_EDP_24M>;
- assigned-clock-parents = <&xin24m>;
-
/*
* Note: Although SCLK_* are the working clocks
* of device without including on the NOC, needed for
@@ -1193,6 +1190,8 @@
compatible = "rockchip,rk3288-dp";
reg = <0x0 0xff970000 0x0 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_EDP_24M>;
+ assigned-clock-parents = <&xin24m>;
clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
clock-names = "dp", "pclk";
phys = <&edp_phy>;
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 4/6] rockchip: Switch rk3288-veyron boards to upstream devicetree
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
2026-01-11 16:30 ` [PATCH v2 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron Johan Jonker
2026-01-11 16:30 ` [PATCH v2 3/6] ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288 Johan Jonker
@ 2026-01-11 16:31 ` Johan Jonker
2026-01-11 16:31 ` [PATCH v2 5/6] rockchip: Switch remaining rk3288 " Johan Jonker
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:31 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
Switch rk3288-veyron boards to upstream devicetree.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changed V2:
Moved upstream changes to separate patches
Add missing MAINTAINERS entry
---
arch/arm/dts/cros-ec-sbs.dtsi | 52 --
arch/arm/dts/rk3288-veyron-chromebook.dtsi | 205 ------
arch/arm/dts/rk3288-veyron-jerry.dts | 208 ------
arch/arm/dts/rk3288-veyron-mickey.dts | 266 -------
arch/arm/dts/rk3288-veyron-minnie.dts | 302 --------
arch/arm/dts/rk3288-veyron-speedy.dts | 143 ----
arch/arm/dts/rk3288-veyron.dtsi | 795 ---------------------
board/google/veyron/MAINTAINERS | 10 +-
configs/chromebit_mickey_defconfig | 5 +-
configs/chromebook_jerry_defconfig | 5 +-
configs/chromebook_minnie_defconfig | 5 +-
configs/chromebook_speedy_defconfig | 5 +-
12 files changed, 13 insertions(+), 1988 deletions(-)
delete mode 100644 arch/arm/dts/cros-ec-sbs.dtsi
delete mode 100644 arch/arm/dts/rk3288-veyron-chromebook.dtsi
delete mode 100644 arch/arm/dts/rk3288-veyron-jerry.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-mickey.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-minnie.dts
delete mode 100644 arch/arm/dts/rk3288-veyron-speedy.dts
delete mode 100644 arch/arm/dts/rk3288-veyron.dtsi
diff --git a/arch/arm/dts/cros-ec-sbs.dtsi b/arch/arm/dts/cros-ec-sbs.dtsi
deleted file mode 100644
index 71f5c5ecce46..000000000000
--- a/arch/arm/dts/cros-ec-sbs.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Smart battery dts fragment for devices that use cros-ec-sbs
- *
- * Copyright (c) 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&i2c_tunnel {
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,i2c-retry-count = <2>;
- sbs,poll-retry-count = <1>;
- };
-};
diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
deleted file mode 100644
index 143eaae26db5..000000000000
--- a/arch/arm/dts/rk3288-veyron-chromebook.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Veyron (and derivatives) board device tree source
- *
- * Copyright 2014 Google, Inc
- */
-
-#include <dt-bindings/clock/rockchip,rk808.h>
-#include <dt-bindings/input/input.h>
-#include "rk3288-veyron.dtsi"
-
-/ {
- aliases {
- i2c20 = &i2c_tunnel;
- video0 = &vopl;
- video1 = &vopb;
- };
-
- gpio_keys: gpio-keys {
- pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
- lid {
- label = "Lid";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- linux,code = <0>; /* SW_LID */
- linux,input-type = <5>; /* EV_SW */
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
- };
-
- gpio-charger {
- compatible = "gpio-charger";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&ac_present_ap>;
- charger-type = "mains";
- };
-
- /* A non-regulated voltage from power supply or battery */
- vccsys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vccsys";
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc33_sys: vcc33-sys {
- vin-supply = <&vccsys>;
- };
-
- vcc_5v: vcc-5v {
- vin-supply = <&vccsys>;
- };
-
- /* This turns on vbus for host1 (dwc2) */
- vcc5_host1: vcc5-host1-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host1_pwr_en>;
- regulator-name = "vcc5_host1";
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* This turns on vbus for otg for host mode (dwc2) */
- vcc5v_otg: vcc5v-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usbotg_pwren_h>;
- regulator-name = "vcc5_host2";
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&rk808 {
- regulators {
- vcc33_ccd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_ccd";
- regulator-suspend-mem-disabled;
- };
- };
-};
-
-&spi0 {
- status = "okay";
- spi-activate-delay = <100>;
- spi-max-frequency = <3000000>;
- spi-deactivate-delay = <200>;
-
- cros_ec: ec@0 {
- compatible = "google,cros-ec-spi";
- spi-max-frequency = <3000000>;
- interrupt-parent = <&gpio7>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- ec-interrupt = <&gpio7 7 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_int>;
- reg = <0>;
- google,cros-ec-spi-pre-delay = <30>;
-
- i2c_tunnel: i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- google,remote-bus = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&i2c4 {
- trackpad@15 {
- compatible = "elan,i2c_touchpad";
- interrupt-parent = <&gpio7>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int>;
- reg = <0x15>;
- vcc-supply = <&vcc33_io>;
- wakeup-source;
- };
-};
-
-&pinctrl {
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &suspend_l_wake
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &suspend_l_sleep
- &bt_dev_wake_sleep
- >;
-
- buttons {
- ap_lid_int_l: ap-lid-int-l {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- charger {
- ac_present_ap: ac-present-ap {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- cros-ec {
- ec_int: ec-int {
- rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_wp_gpio: sdmmc-wp-gpio {
- rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- suspend {
- suspend_l_wake: suspend-l-wake {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- suspend_l_sleep: suspend-l-sleep {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- trackpad {
- trackpad_int: trackpad-int {
- rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb-host {
- host1_pwr_en: host1-pwr-en {
- rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usbotg_pwren_h: usbotg-pwren-h {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/dts/rk3288-veyron-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
deleted file mode 100644
index 40fee55c7507..000000000000
--- a/arch/arm/dts/rk3288-veyron-jerry.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Veyron Jerry Rev 3+ board device tree source
- *
- * Copyright 2014 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
-
-/ {
- model = "Google Jerry";
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
- "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
- "google,veyron-jerry-rev3", "google,veyron-jerry",
- "google,veyron", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-
- sound {
- compatible = "rockchip,audio-max98090-jerry";
-
- cpu {
- sound-dai = <&i2s 0>;
- };
-
- codec {
- sound-dai = <&max98090 0>;
- };
- };
-};
-
-&gpio_keys {
- power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
-};
-
-&backlight {
- power-supply = <&backlight_regulator>;
-};
-
-&panel {
- power-supply= <&panel_regulator>;
-};
-
-&rk808 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
-
- regulators {
- mic_vcc: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "mic_vcc";
- regulator-suspend-mem-disabled;
- };
- };
-};
-
-&sdmmc {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
- &sdmmc_bus4>;
- disable-wp;
-};
-
-&vcc_5v {
- enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&drv_5v>;
-};
-
-&vcc50_hdmi {
- enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc50_hdmi_en>;
-};
-
-&edp {
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
-};
-
-&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buck-5v {
- drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- emmc {
- /* Make sure eMMC is not in reset */
- emmc_deassert_reset: emmc-deassert-reset {
- rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- hdmi {
- vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-};
-
-&i2c4 {
- status = "okay";
-
- /*
- * Trackpad pin control is shared between Elan and Synaptics devices
- * so we have to pull it up to the bus level.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_xfer &trackpad_int>;
-
- trackpad@15 {
- compatible = "elan,i2c_touchpad";
- interrupt-parent = <&gpio7>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- /*
- * Remove the inherited pinctrl settings to avoid clashing
- * with bus-wide ones.
- */
- /delete-property/pinctrl-names;
- /delete-property/pinctrl-0;
- reg = <0x15>;
- vcc-supply = <&vcc33_io>;
- wakeup-source;
- };
-
- trackpad@2c {
- compatible = "hid-over-i2c";
- interrupt-parent = <&gpio7>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x2c>;
- hid-descr-addr = <0x0020>;
- vcc-supply = <&vcc33_io>;
- wakeup-source;
- };
-};
diff --git a/arch/arm/dts/rk3288-veyron-mickey.dts b/arch/arm/dts/rk3288-veyron-mickey.dts
deleted file mode 100644
index 0521d9e0e9a2..000000000000
--- a/arch/arm/dts/rk3288-veyron-mickey.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Google Veyron Mickey Rev 0 board device tree source
- *
- * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
-
-/ {
- model = "Google Mickey";
- compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
- "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
- "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
- "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
- "google,veyron-mickey-rev0", "google,veyron-mickey",
- "google,veyron", "rockchip,rk3288";
-
- vcc_5v: vcc-5v {
- vin-supply = <&vcc33_sys>;
- };
-
- vcc33_io: vcc33_io {
- compatible = "regulator-fixed";
- regulator-name = "vcc33_io";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc33_sys>;
- };
-};
-
-&cpu_thermal {
- /delete-node/ trips;
- /delete-node/ cooling-maps;
-
- trips {
- cpu_alert_almost_warm: cpu_alert_almost_warm {
- temperature = <63000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert_warm: cpu_alert_warm {
- temperature = <65000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert_almost_hot: cpu_alert_almost_hot {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert_hot: cpu_alert_hot {
- temperature = <82000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert_hotter: cpu_alert_hotter {
- temperature = <84000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert_very_hot: cpu_alert_very_hot {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- /*
- * After 1st level, throttle the CPU down to as low as 1.4 GHz
- * and don't let the GPU go faster than 400 MHz. Note that we
- * won't throttle the GPU lower than 400 MHz due to CPU
- * heat--we'll let the GPU do the rest itself.
- */
- cpu_warm_limit_cpu {
- trip = <&cpu_alert_warm>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 4>;
- };
-
- /*
- * Add some discrete steps to help throttling system deal
- * with the fact that there are two passive cooling devices:
- * the CPU and the GPU.
- *
- * - 1.2 GHz - 1.0 GHz (almost hot)
- * - 800 MHz (hot)
- * - 800 MHz - 696 MHz (hotter)
- * - 696 MHz - min (very hot)
- *
- * Note:
- * - 800 MHz appears to be a "sweet spot" for me. I can run
- * some pretty serious workload here and be happy.
- * - After 696 MHz we stop lowering voltage, so throttling
- * past there is less effective.
- */
- cpu_almost_hot_limit_cpu {
- trip = <&cpu_alert_almost_hot>;
- cooling-device =
- <&cpu0 5 6>;
- };
- cpu_hot_limit_cpu {
- trip = <&cpu_alert_hot>;
- cooling-device =
- <&cpu0 7 7>;
- };
- cpu_hotter_limit_cpu {
- trip = <&cpu_alert_hotter>;
- cooling-device =
- <&cpu0 7 8>;
- };
- cpu_very_hot_limit_cpu {
- trip = <&cpu_alert_very_hot>;
- cooling-device =
- <&cpu0 8 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&emmc {
- /delete-property/mmc-hs200-1_8v;
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c4 {
- status = "disabled";
-};
-
-&i2s {
- status = "okay";
- clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
- clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
-};
-
-&rk808 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
-
- /delete-property/ vcc6-supply;
- /delete-property/ vcc12-supply;
-
- vcc11-supply = <&vcc33_sys>;
-
- regulators {
- /* vcc33_io is sourced directly from vcc33_sys */
- /delete-node/ LDO_REG1;
- /delete-node/ LDO_REG7;
-
- /* This is not a pwren anymore, but the real power supply */
- vdd10_lcd: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-suspend-mem-disabled;
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-suspend-mem-disabled;
- };
- };
-};
-
-&pinctrl {
- hdmi {
- power_hdmi_on: power-hdmi-on {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-};
-
-&sdmmc {
- status = "disabled";
-};
-
-&sdio0 {
- status = "disabled";
-};
-
-&sdmmc {
- status = "disabled";
-};
-
-&spi0 {
- status = "disabled";
-};
-
-&usb_host0_ehci {
- status = "disabled";
-};
-
-&usb_host1 {
- status = "disabled";
-};
-
-&vcc50_hdmi {
- enable-active-high;
- gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&power_hdmi_on>;
-};
diff --git a/arch/arm/dts/rk3288-veyron-minnie.dts b/arch/arm/dts/rk3288-veyron-minnie.dts
deleted file mode 100644
index b56a3f4f51af..000000000000
--- a/arch/arm/dts/rk3288-veyron-minnie.dts
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Google Veyron Minnie Rev 0+ board device tree source
- *
- * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
-
-/ {
- model = "Google Minnie";
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
- "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
- "google,veyron-minnie-rev0", "google,veyron-minnie",
- "google,veyron", "rockchip,rk3288";
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- sound {
- compatible = "rockchip,audio-max98090-jerry";
-
- cpu {
- sound-dai = <&i2s 0>;
- };
-
- codec {
- sound-dai = <&max98090 0>;
- };
- };
-};
-
-&backlight {
- /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
- brightness-levels = <
- 0 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- power-supply = <&backlight_regulator>;
-};
-
-&emmc {
- /delete-property/mmc-hs200-1_8v;
-};
-
-&gpio_keys {
- pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
-
- volum_down {
- label = "Volum_down";
- gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <100>;
- };
-
- volum_up {
- label = "Volum_up";
- gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <100>;
- };
-};
-
-&i2c_tunnel {
- battery: bq27500@55 {
- compatible = "ti,bq27500";
- reg = <0x55>;
- };
-};
-
-&i2c3 {
- status = "okay";
-
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- touchscreen@10 {
- compatible = "elan,ekth3500";
- reg = <0x10>;
- interrupt-parent = <&gpio2>;
- interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touch_int &touch_rst>;
- reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- vcc33-supply = <&vcc33_touch>;
- vccio-supply = <&vcc33_touch>;
- };
-};
-
-&panel {
- compatible = "auo,b101ean01", "simple-panel";
- power-supply= <&panel_regulator>;
-};
-
-&rk808 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
-
- regulators {
- vcc33_touch: LDO_REG2 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_touch";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc5v_touch: SWITCH_REG2 {
- regulator-name = "vcc5v_touch";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
-};
-
-&sdmmc {
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
- &sdmmc_bus4>;
-};
-
-&vcc_5v {
- enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&drv_5v>;
-};
-
-&vcc50_hdmi {
- enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc50_hdmi_en>;
-};
-
-&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buck-5v {
- drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- volum_down_l: volum-down-l {
- rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- volum_up_l: volum-up-l {
- rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- hdmi {
- vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- prochot {
- gpio_prochot: gpio-prochot {
- rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- touchscreen {
- touch_int: touch-int {
- rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- touch_rst: touch-rst {
- rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
diff --git a/arch/arm/dts/rk3288-veyron-speedy.dts b/arch/arm/dts/rk3288-veyron-speedy.dts
deleted file mode 100644
index 58c1fe96eea2..000000000000
--- a/arch/arm/dts/rk3288-veyron-speedy.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Veyron Speedy Rev 1+ board device tree source
- *
- * Copyright 2015 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
-#include "rk3288-veyron-speedy-u-boot.dtsi"
-
-/ {
- model = "Google Speedy";
- compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
- "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
- "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
- "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
- "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
-
- panel_regulator: panel-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_enable_h>;
- regulator-name = "panel_regulator";
- startup-delay-us = <100000>;
- vin-supply = <&vcc33_sys>;
- };
-
- vcc18_lcd: vcc18-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&avdd_1v8_disp_en>;
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc18_wl>;
- };
-
- backlight_regulator: backlight-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_pwr_en>;
- regulator-name = "backlight_regulator";
- vin-supply = <&vcc33_sys>;
- startup-delay-us = <15000>;
- };
-};
-
-&backlight {
- power-supply = <&backlight_regulator>;
-};
-
-&cpu_alert0 {
- temperature = <65000>;
-};
-
-&cpu_alert1 {
- temperature = <70000>;
-};
-
-&edp {
- /delete-property/pinctrl-names;
- /delete-property/pinctrl-0;
-
- force-hpd;
-};
-
-&panel {
- power-supply = <&panel_regulator>;
-};
-
-&rk808 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
-};
-
-&sdmmc {
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
- &sdmmc_bus4>;
-};
-
-&vcc_5v {
- enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&drv_5v>;
-};
-
-&vcc50_hdmi {
- enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc50_hdmi_en>;
-};
-
-&pinctrl {
- backlight {
- bl_pwr_en: bl_pwr_en {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buck-5v {
- drv_5v: drv-5v {
- rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- hdmi {
- vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd {
- lcd_enable_h: lcd-en {
- rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- avdd_1v8_disp_en: avdd-1v8-disp-en {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dvs_1: dvs-1 {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-};
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
deleted file mode 100644
index 99406151bf59..000000000000
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Veyron (and derivatives) board device tree source
- *
- * Copyright 2014 Google, Inc
- */
-
-#include <dt-bindings/clock/rockchip,rk808.h>
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- chosen {
- stdout-path = &uart2;
- };
-
- firmware {
- chromeos {
- pinctrl-names = "default";
- pinctrl-0 = <&fw_wp_ap>;
- write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <128>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- backlight-boot-off;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en>;
- pwms = <&pwm0 0 1000000 0>;
- };
-
- panel: panel {
- compatible ="cnm,n116bgeea2","simple-panel";
- status = "okay";
- power-supply = <&vcc33_lcd>;
- backlight = <&backlight>;
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_key_h>;
- power {
- label = "Power";
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_POWER>;
- debounce-interval = <100>;
- gpio-key,wakeup;
- };
- };
-
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&ap_warm_reset_h>;
- priority = /bits/ 8 <200>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- pinctrl-0 = <&emmc_reset>;
- pinctrl-names = "default";
- reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
- };
-
- sound {
- compatible = "rockchip,rockchip-audio-max98090";
- rockchip,model = "ROCKCHIP-I2S";
- rockchip,i2s-controller = <&i2s>;
- rockchip,audio-codec = <&max98090>;
- rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
- rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- rockchip,headset-codec = <&headsetcodec>;
- pinctrl-names = "default";
- pinctrl-0 = <&mic_det>, <&hp_det>;
- };
-
- vdd_logic: pwm-regulator {
- compatible = "pwm-regulator";
- pwms = <&pwm1 0 2000 0>;
-
- voltage-table = <1350000 0>,
- <1300000 10>,
- <1250000 20>,
- <1200000 31>,
- <1150000 41>,
- <1100000 52>,
- <1050000 62>,
- <1000000 72>,
- < 950000 83>;
-
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_logic";
- regulator-ramp-delay = <4000>;
- };
-
- vcc33_sys: vcc33-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc33_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vccsys>;
- };
-
- vcc_5v: vcc-5v {
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc50_hdmi: vcc50-hdmi {
- compatible = "regulator-fixed";
- regulator-name = "vcc50_hdmi";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_5v>;
- };
-
- bt_regulator: bt-regulator {
- /*
- * On the module itself this is one of these (depending
- * on the actual card pouplated):
- * - BT_I2S_WS_BT_RFDISABLE_L
- * - No connect
- */
-
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_enable_l>;
- regulator-name = "bt_regulator";
- };
-
- wifi_regulator: wifi-regulator {
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
-
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- regulator-name = "wifi_regulator";
-
- /* Faux input supply. See bt_regulator description. */
- vin-supply = <&bt_regulator>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&efuse {
- status = "okay";
-};
-
-&emmc {
- broken-cd;
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- mmc-pwrseq = <&emmc_pwrseq>;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
- status = "okay";
-};
-
-&sdio0 {
- broken-cd;
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- cap-sdio-irq;
- card-external-vcc-supply = <&wifi_regulator>;
- clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>,
- <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock";
- keep-power-in-suspend;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sys>;
- vqmmc-supply = <&vcc18_wl>;
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- card-detect-delay = <200>;
- cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
- num-slots = <1>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&spi2 {
- status = "okay";
-
- spi_flash: spiflash@0 {
- compatible = "spidev", "jedec,spi-nor";
- spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */
- reg = <0>;
- };
-};
-
-&i2c0 {
- status = "okay";
-
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
- i2c-scl-rising-time-ns = <100>; /* 45ns measured */
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- clock-output-names = "xin32k", "wifibt_32kin";
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- reg = <0x1b>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
-
- vcc1-supply = <&vcc33_sys>;
- vcc2-supply = <&vcc33_sys>;
- vcc3-supply = <&vcc33_sys>;
- vcc4-supply = <&vcc33_sys>;
- vcc6-supply = <&vcc_5v>;
- vcc7-supply = <&vcc33_sys>;
- vcc8-supply = <&vcc33_sys>;
- vcc9-supply = <&vcc_5v>;
- vcc10-supply = <&vcc33_sys>;
- vcc11-supply = <&vcc_5v>;
- vcc12-supply = <&vcc_18>;
-
- vddio-supply = <&vcc33_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1450000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6001>;
- regulator-suspend-mem-disabled;
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6001>;
- regulator-suspend-mem-disabled;
- };
-
- vcc135_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc135_ddr";
- regulator-suspend-mem-enabled;
- };
-
- /*
- * vcc_18 has several aliases. (vcc18_flashio and
- * vcc18_wl). We'll add those aliases here just to
- * make it easier to follow the schematic. The signals
- * are actually hooked together and only separated for
- * power measurement purposes).
- */
- vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-suspend-mem-microvolt = <1800000>;
- };
-
- /*
- * Note that both vcc33_io and vcc33_pmuio are always
- * powered together. To simplify the logic in the dts
- * we just refer to vcc33_io every time something is
- * powered from vcc33_pmuio. In fact, on later boards
- * (such as danger) they're the same net.
- */
- vcc33_io: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_io";
- regulator-suspend-mem-microvolt = <3300000>;
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-suspend-mem-microvolt = <1000000>;
- };
-
- vccio_sd: LDO_REG4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-suspend-mem-disabled;
- };
-
- vcc33_sd: LDO_REG5 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_sd";
- regulator-suspend-mem-disabled;
- };
-
- vcc18_codec: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-suspend-mem-disabled;
- };
-
- vdd10_lcd_pwren_h: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-name = "vdd10_lcd_pwren_h";
- regulator-suspend-mem-disabled;
- };
-
- vcc33_lcd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lcd";
- regulator-suspend-mem-disabled;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
- i2c-scl-rising-time-ns = <100>; /* 40ns measured */
-
- tpm: tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- powered-while-suspended;
- };
-};
-
-&i2c2 {
- status = "okay";
-
- /* 100kHz since 4.7k resistors don't rise fast enough */
- clock-frequency = <100000>;
- i2c-scl-falling-time-ns = <50>; /* 10ns measured */
- i2c-scl-rising-time-ns = <800>; /* 600ns measured */
-
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- #sound-dai-cells = <0>;
- interrupt-parent = <&gpio6>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&int_codec>;
- };
-};
-
-&i2c3 {
- status = "okay";
-
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-};
-
-&i2c4 {
- status = "okay";
-
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>; /* 11ns measured */
- i2c-scl-rising-time-ns = <300>; /* 225ns measured */
-
- headsetcodec: ts3a227e@3b {
- compatible = "ti,ts3a227e";
- reg = <0x3b>;
- interrupt-parent = <&gpio0>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ts3a227e_int_l>;
- ti,micbias = <7>; /* MICBIAS = 2.8V */
- };
-};
-
-&i2c5 {
- status = "okay";
-
- clock-frequency = <100000>;
- i2c-scl-falling-time-ns = <300>;
- i2c-scl-rising-time-ns = <1000>;
-};
-
-&i2s {
- status = "okay";
- clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
- clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
-};
-
-&io_domains {
- audio-supply = <&vcc18_codec>;
- bb-supply = <&vcc33_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc18_flashio>;
- gpio1830-supply = <&vcc33_io>;
- gpio30-supply = <&vcc33_io>;
- lcdc-supply = <&vcc33_lcd>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc18_wl>;
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-
- /* Pins don't include flow control by default; add that in */
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- /* We need to go faster than 24MHz, so adjust clock parents / rates */
- assigned-clocks = <&cru SCLK_UART0>;
- assigned-clock-rates = <48000000>;
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- reg-shift = <2>;
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&edp {
- status = "okay";
- rockchip,panel = <&panel>;
-};
-
-&hdmi {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
-};
-
-&tsadc {
- tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&pinctrl {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &bt_dev_wake_sleep
- >;
-
- /* Add this for sdmmc pins to SD card */
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwr_key_h: pwr-key-h {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- codec {
- hp_det: hp-det {
- rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- int_codec: int-codec {
- rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- mic_det: mic-det {
- rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- emmc {
- emmc_reset: emmc-reset {
- rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- /*
- * We run eMMC at max speed; bump up drive strength.
- * We also have external pulls, so disable the internal ones.
- */
- emmc_clk: emmc-clk {
- rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
- };
-
- emmc_cmd: emmc-cmd {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
- };
-
- emmc_bus8: emmc-bus8 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
- <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
- };
- };
-
- headset {
- ts3a227e_int_l: ts3a227e-int-l {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- /*
- * Causes jerry to hang when probing bus 0
- * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- */
- };
- };
-
- reboot {
- ap_warm_reset_h: ap-warm-reset-h {
- rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio0 {
- wifi_enable_h: wifienable-h {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- /* NOTE: mislabelled on schematic; should be bt_enable_h */
- bt_enable_l: bt-enable-l {
- rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- /*
- * We run sdio0 at max speed; bump up drive strength.
- * We also have external pulls, so disable the internal ones.
- */
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- /*
- * These pins are only present on very new veyron boards; on
- * older boards bt_dev_wake is simply always high. Note that
- * gpio4_26 is a NC on old veyron boards, so it doesn't hurt
- * to map this pin everywhere
- */
- bt_dev_wake_sleep: bt-dev-wake-sleep {
- rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- bt_dev_wake_awake: bt-dev-wake-awake {
- rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- sdmmc {
- /*
- * We run sdmmc at max speed; bump up drive strength.
- * We also have external pulls, so disable the internal ones.
- */
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
- };
-
- /*
- * Builtin CD line is hooked to ground to prevent JTAG at boot
- * (and also to get the voltage rail correct). Make we
- * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
- * think there's a card inserted
- */
- sdmmc_cd_disabled: sdmmc-cd-disabled {
- rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- /* This is where we actually hook up CD */
- sdmmc_cd_gpio: sdmmc-cd-gpio {
- rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- tpm {
- tpm_int_h: tpm-int-h {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- write-protect {
- fw_wp_ap: fw-wp-ap {
- rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
- needs-reset-on-resume;
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
- assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
- assigned-clock-parents = <&cru SCLK_OTGPHY0>;
-};
diff --git a/board/google/veyron/MAINTAINERS b/board/google/veyron/MAINTAINERS
index 67341b5d5564..382ad212569a 100644
--- a/board/google/veyron/MAINTAINERS
+++ b/board/google/veyron/MAINTAINERS
@@ -1,7 +1,6 @@
CHROMEBOOK JERRY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-veyron-jerry.dts
F: arch/arm/dts/rk3288-veyron-jerry-u-boot.dtsi
F: board/google/veyron/
F: include/configs/veyron.h
@@ -10,7 +9,6 @@ F: configs/chromebook_jerry_defconfig
CHROMEBIT MICKEY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-veyron-mickey.dts
F: arch/arm/dts/rk3288-veyron-mickey-u-boot.dtsi
F: board/google/veyron/
F: include/configs/veyron.h
@@ -19,7 +17,6 @@ F: configs/chromebit_mickey_defconfig
CHROMEBOOK MINNIE BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-veyron-minnie.dts
F: arch/arm/dts/rk3288-veyron-minnie-u-boot.dtsi
F: board/google/veyron/
F: include/configs/veyron.h
@@ -28,7 +25,6 @@ F: configs/chromebook_minnie_defconfig
CHROMEBOOK SPEEDY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-veyron-speedy.dts
F: arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi
F: board/google/veyron/
F: include/configs/veyron.h
@@ -37,8 +33,4 @@ F: configs/chromebook_speedy_defconfig
CHROMEBOOK VEYRON COMMON FILES
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-veyron.dtsi
-F: arch/arm/dts/rk3288-veyron-analog-audio.dtsi
-F: arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi
-F: arch/arm/dts/rk3288-veyron-chromebook.dtsi
-F: arch/arm/dts/rk3288-veyron-edp.dtsi
+F: arch/arm/dts/rk3288-veyron-u-boot.dtsi
diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig
index 02f7876f2dc1..1ae596b4f4f6 100644
--- a/configs/chromebit_mickey_defconfig
+++ b/configs/chromebit_mickey_defconfig
@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-mickey"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-mickey"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-mickey.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -56,6 +56,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 928a713cd1fd..5151af8838e4 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-jerry"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -28,7 +28,7 @@ CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-jerry.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-jerry.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -56,6 +56,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig
index 7a875d42c3f1..3ab1e90746f5 100644
--- a/configs/chromebook_minnie_defconfig
+++ b/configs/chromebook_minnie_defconfig
@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-minnie"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-minnie"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-minnie.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -57,6 +57,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig
index d890a344f521..796d29604242 100644
--- a/configs/chromebook_speedy_defconfig
+++ b/configs/chromebook_speedy_defconfig
@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-speedy"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-veyron-speedy"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -29,7 +29,7 @@ CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-speedy.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-veyron-speedy.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -57,6 +57,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 5/6] rockchip: Switch remaining rk3288 boards to upstream devicetree
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
` (2 preceding siblings ...)
2026-01-11 16:31 ` [PATCH v2 4/6] rockchip: Switch rk3288-veyron boards to upstream devicetree Johan Jonker
@ 2026-01-11 16:31 ` Johan Jonker
2026-01-11 16:31 ` [PATCH v2 6/6] rockchip: imply OF_UPSTREAM for rk3288 boards Johan Jonker
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:31 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
Switch remaining rk3288 boards to upstream devicetree.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
...boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} | 0
arch/arm/dts/rk3288-evb.dts | 20 -
arch/arm/dts/rk3288-evb.dtsi | 476 ---------------
arch/arm/dts/rk3288-popmetal.dts | 20 -
arch/arm/dts/rk3288-popmetal.dtsi | 547 ------------------
arch/arm/dts/rk3288-rock-pi-n8.dts | 17 -
arch/arm/dts/rk3288-rock2-som.dtsi | 278 ---------
arch/arm/dts/rk3288-rock2-square.dts | 181 ------
arch/arm/dts/rk3288-vmarc-som.dtsi | 361 ------------
arch/arm/dts/rk3288-vyasa.dts | 473 ---------------
.../dts/rockchip-radxa-dalang-carrier.dtsi | 137 -----
board/amarula/vyasa-rk3288/MAINTAINERS | 1 -
board/chipspark/popmetal_rk3288/MAINTAINERS | 1 -
board/radxa/rock2/MAINTAINERS | 1 -
board/rockchip/evb_rk3288/MAINTAINERS | 6 +-
...8_defconfig => evb-rk3288-rk808_defconfig} | 5 +-
configs/phycore-rk3288_defconfig | 2 +-
configs/popmetal-rk3288_defconfig | 5 +-
configs/rock-pi-n8-rk3288_defconfig | 3 +-
configs/rock2_defconfig | 5 +-
configs/vyasa-rk3288_defconfig | 5 +-
doc/board/rockchip/rockchip.rst | 8 +-
22 files changed, 22 insertions(+), 2530 deletions(-)
rename arch/arm/dts/{rk3288-evb-u-boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} (100%)
delete mode 100644 arch/arm/dts/rk3288-evb.dts
delete mode 100644 arch/arm/dts/rk3288-evb.dtsi
delete mode 100644 arch/arm/dts/rk3288-popmetal.dts
delete mode 100644 arch/arm/dts/rk3288-popmetal.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock-pi-n8.dts
delete mode 100644 arch/arm/dts/rk3288-rock2-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock2-square.dts
delete mode 100644 arch/arm/dts/rk3288-vmarc-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-vyasa.dts
delete mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
rename configs/{evb-rk3288_defconfig => evb-rk3288-rk808_defconfig} (94%)
diff --git a/arch/arm/dts/rk3288-evb-u-boot.dtsi b/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
similarity index 100%
rename from arch/arm/dts/rk3288-evb-u-boot.dtsi
rename to arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
diff --git a/arch/arm/dts/rk3288-evb.dts b/arch/arm/dts/rk3288-evb.dts
deleted file mode 100644
index bb24a96cddf7..000000000000
--- a/arch/arm/dts/rk3288-evb.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
- model = "Evb-RK3288";
- compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-};
-
-&pwm1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
deleted file mode 100644
index 0e347beb154d..000000000000
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ /dev/null
@@ -1,476 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-#include "rk3288.dtsi"
-
-/ {
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- keys: gpio-keys {
- compatible = "gpio-keys";
-
- button@0 {
- gpio-key,wakeup = <1>;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- label = "GPIO Power";
- linux,code = <116>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_key>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_flash: flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_5v: usb-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_host_5v: usb-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc_host_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_5v>;
- };
-
- vcc_otg_5v: usb-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc_otg_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_5v>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_sys>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <50>;
- pwms = <&pwm0 0 25000 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- pwm-delay-us = <10000>;
- status = "disabled";
- };
-
- panel: panel {
- compatible = "simple-panel";
- power-supply = <&vcc_io>;
- backlight = <&backlight>;
- enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- broken-cd;
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
- status = "okay";
-};
-
-&gmac {
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- vdd_cpu: syr827@40 {
- compatible = "silergy,syr827";
- fcs,suspend-voltage-selector = <1>;
- reg = <0x40>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- fcs,suspend-voltage-selector = <1>;
- reg = <0x41>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- hym8563: hym8563@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- interrupt-parent = <&gpio7>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&rtc_int>;
- };
-
- act8846: act8846@5a {
- compatible = "active-semi,act8846";
- reg = <0x5a>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_hold>;
- system-power-controller;
-
- regulators {
- vcc_ddr: REG1 {
- regulator-name = "vcc_ddr";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_io: REG2 {
- regulator-name = "vcc_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_log: REG3 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vcc_20: REG4 {
- regulator-name = "vcc_20";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- vccio_sd: REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd10_lcd: REG6 {
- regulator-name = "vdd10_lcd";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcca_codec: REG7 {
- regulator-name = "vcca_codec";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_tp: REG8 {
- regulator-name = "vcca_33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vccio_pmu: REG9 {
- regulator-name = "vccio_pmu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_10: REG10 {
- regulator-name = "vdd_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_18: REG11 {
- regulator-name = "vcc_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc18_lcd: REG12 {
- regulator-name = "vcc18_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- act8846 {
- pwr_hold: pwr-hold {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- hym8563 {
- rtc_int: rtc-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- keys {
- pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_host {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_18>;
- status = "okay";
-};
-
-&sdio0 {
- broken-cd;
- bus-width = <4>;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
- vmmc-supply = <&vcc_18>;
- status = "disabled";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
- vmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&mipi_dsi {
- status = "disabled";
- rockchip,panel = <&panel>;
- display-timings {
- timing0 {
- bits-per-pixel = <24>;
- clock-frequency = <160000000>;
- hfront-porch = <120>;
- hsync-len = <20>;
- hback-porch = <21>;
- hactive = <1200>;
- vfront-porch = <21>;
- vsync-len = <3>;
- vback-porch = <18>;
- vactive = <1920>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
-};
-
-&wdt {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-popmetal.dts b/arch/arm/dts/rk3288-popmetal.dts
deleted file mode 100644
index 736dc51e2615..000000000000
--- a/arch/arm/dts/rk3288-popmetal.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3288-popmetal.dtsi"
-
-/ {
- model = "PopMetal-RK3288";
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-};
-
-&pwm1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-popmetal.dtsi b/arch/arm/dts/rk3288-popmetal.dtsi
deleted file mode 100644
index ecff641b1099..000000000000
--- a/arch/arm/dts/rk3288-popmetal.dtsi
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
- memory{
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- ir: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_int>;
- };
-
- vcc_flash: flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- /*
- * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
- * by the dvp_pwr pin.
- */
- vcc18_dvp: vcc18-dvp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc18-dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc28_dvp>;
- };
-
- vcc28_dvp: vcc28-dvp-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&dvp_pwr>;
- regulator-name = "vcc28_dvp";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc5v0_host: usb-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc_flash>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&gmac {
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_18>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_lan: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_sd: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_lcd: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- ldo5: LDO_REG5 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "ldo5";
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_33: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_33";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_wl: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vccio_wl";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_lcd: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
-
- ak8963: ak8963@0d {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0d>;
- interrupt-parent = <&gpio8>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&comp_int>;
- };
-
- l3g4200d: l3g4200d@68 {
- compatible = "st,l3g4200d-gyro";
- st,drdy-int-pin = <2>;
- reg = <0x6b>;
- };
-
- mma8452: mma8452@1d {
- compatible = "fsl,mma8452";
- reg = <0x1d>;
- interrupt-parent = <&gpio8>;
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&gsensor_int>;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcca_33>;
- bb-supply = <&vcc_io>;
- dvp-supply = <&vcc18_dvp>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
- gpio30-supply = <&vcc_io>;
- gpio1830-supply = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vccio_wl>;
- status = "okay";
-};
-
-&pinctrl {
- ak8963 {
- comp_int: comp-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- dvp {
- dvp_pwr: dvp-pwr {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- ir {
- ir_int: ir-int {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- mma8452 {
- gsensor_int: gsensor-int {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_host {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&saradc {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>;
- rockchip,hw-tshut-polarity = <0>;
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usb_host1 {
- vbus-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts b/arch/arm/dts/rk3288-rock-pi-n8.dts
deleted file mode 100644
index c9894a60e703..000000000000
--- a/arch/arm/dts/rk3288-rock-pi-n8.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3288.dtsi"
-#include <rockchip-radxa-dalang-carrier.dtsi>
-#include "rk3288-vmarc-som.dtsi"
-
-/ {
- model = "Radxa ROCK Pi N8";
- compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
- "rockchip,rk3288";
-};
diff --git a/arch/arm/dts/rk3288-rock2-som.dtsi b/arch/arm/dts/rk3288-rock2-som.dtsi
deleted file mode 100644
index 58e32fbb80f6..000000000000
--- a/arch/arm/dts/rk3288-rock2-som.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3288.dtsi"
-
-/ {
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- pinctrl-0 = <&emmc_reset>;
- pinctrl-names = "default";
- reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- mmc-pwrseq = <&emmc_pwrseq>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vccio_pmu>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins &phy_rst>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
- rx_delay = <0x10>;
- tx_delay = <0x30>;
-};
-
-&i2c0 {
- status = "okay";
-
- act8846: act8846@5a {
- compatible = "active-semi,act8846";
- reg = <0x5a>;
- system-power-controller;
- inl1-supply = <&vcc_io>;
- inl2-supply = <&vcc_sys>;
- inl3-supply = <&vcc_20>;
- vp1-supply = <&vcc_sys>;
- vp2-supply = <&vcc_sys>;
- vp3-supply = <&vcc_sys>;
- vp4-supply = <&vcc_sys>;
-
- regulators {
- vcc_ddr: REG1 {
- regulator-name = "VCC_DDR";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_io: REG2 {
- regulator-name = "VCC_IO";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_log: REG3 {
- regulator-name = "VDD_LOG";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_20: REG4 {
- regulator-name = "VCC_20";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- vccio_sd: REG5 {
- regulator-name = "VCCIO_SD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd10_lcd: REG6 {
- regulator-name = "VDD10_LCD";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcca_codec: REG7 {
- regulator-name = "VCCA_CODEC";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcca_tp: REG8 {
- regulator-name = "VCCA_TP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccio_pmu: REG9 {
- regulator-name = "VCCIO_PMU";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_10: REG10 {
- regulator-name = "VDD_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_18: REG11 {
- regulator-name = "VCC_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc18_lcd: REG12 {
- regulator-name = "VCC18_LCD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
- };
-
- vdd_cpu: syr827@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-enable-ramp-delay = <300>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <8000>;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-enable-ramp-delay = <300>;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <8000>;
- vin-supply = <&vcc_sys>;
- };
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- emmc {
- emmc_reset: emmc-reset {
- rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- gmac {
- phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-rock2-square.dts b/arch/arm/dts/rk3288-rock2-square.dts
deleted file mode 100644
index 41676696ba33..000000000000
--- a/arch/arm/dts/rk3288-rock2-square.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3288-rock2-som.dtsi"
-
-/ {
- model = "Radxa Rock 2 Square";
- compatible = "radxa,rock2-square", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- ir: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_int>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "SPDIF";
- simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
- cpu { sound-dai = <&spdif>; };
- codec { sound-dai = <&spdif_out>; };
- };
- };
-
- spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- vcc_usb_host: vcc-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- /* Always on as the rockchip usb phy doesn't have a vbus-supply
- * property
- */
- regulator-always-on;
- regulator-name = "vcc_host";
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- hym8563@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
-
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&pinctrl {
- ir {
- ir_int: ir-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&spdif {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- reg-shift = <2>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi
deleted file mode 100644
index 793951655b73..000000000000
--- a/arch/arm/dts/rk3288-vmarc-som.dtsi
+++ /dev/null
@@ -1,361 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-/ {
- compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
-
- vccio_flash: vccio-flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vccio_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vccio_flash>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- phy-supply = <&vcc_io>;
- snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec_c0>;
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1400000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_tp: LDO_REG1 {
- regulator-name = "vcc_tp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_codec: LDO_REG2 {
- regulator-name = "vcca_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_wl: LDO_REG4 {
- regulator-name = "vcc_wl";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-name = "vdd10_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-name = "vcc_18";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_sd: SWITCH_REG1 {
- regulator-name = "vcc_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_lcd: SWITCH_REG2 {
- regulator-name = "vcc_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- interrupt-parent = <&gpio5>;
- interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&io_domains {
- bb-supply = <&vcc_io>;
- flash0-supply = <&vccio_flash>;
- gpio1830-supply = <&vcc_18>;
- gpio30-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc_wl>;
- status = "okay";
-};
-
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
- };
- };
-
- vbus_host {
- usb1_en_oc: usb1-en-oc {
- rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- vbus_typec {
- usb0_en_oc: usb0-en-oc {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&sdio_pwrseq {
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vbus_host {
- enable-active-high;
- gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
-};
-
-&vbus_typec {
- enable-active-high;
- gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
-};
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
deleted file mode 100644
index 4193f7208cd0..000000000000
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
- */
-
-/dts-v1/;
-#include "rk3288.dtsi"
-
-/ {
- model = "Amarula Vyasa-RK3288";
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- dc12_vbat: dc12-vbat {
- compatible = "regulator-fixed";
- regulator-name = "dc12_vbat";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vboot_3v3: vboot-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vboot_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vboot_5v: vboot-5v {
- compatible = "regulator-fixed";
- regulator-name = "vboot_sv";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- v3g_3v3: v3g-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "v3g_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vsus_5v: vsus-5v {
- compatible = "regulator-fixed";
- regulator-name = "vsus_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc50_hdmi: vcc50-hdmi {
- compatible = "regulator-fixed";
- regulator-name = "vcc50_hdmi";
- enable-active-high;
- gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
- pinctrl-names = "default";
- pinctrl-0 = <&vcc50_hdmi_en>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
- vusb1_5v: vusb1-5v {
- compatible = "regulator-fixed";
- regulator-name = "vusb1_5v";
- enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
-
- vusb2_5v: vusb2-5v {
- compatible = "regulator-fixed";
- regulator-name = "vusb2_5v";
- enable-active-high;
- gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_pwr_en>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcca_tp: LDO_REG1 {
- regulator-name = "vcc_tp";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_codec: LDO_REG2 {
- regulator-name = "vcc_codec";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_gps: LDO_REG4 {
- regulator-name = "vcc_gps";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-name = "vdd10_lcd";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-name = "vcc_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-name = "vcc18_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: SWITCH_REG1 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_lan: SWITCH_REG2 {
- regulator-name = "vcc_lan";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- pinctrl-names = "default";
- pinctrl-0 = <&phy_pwr_en>;
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- gmac {
- phy_int: phy-int {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_pmeb: phy-pmeb {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_rst: phy-rst {
- rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- hdmi {
- vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb_host {
- phy_pwr_en: phy-pwr-en {
- rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
- };
-
- usb2_pwr_en: usb2-pwr-en {
- rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
-
- };
- };
-};
diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
deleted file mode 100644
index da1d548b7330..000000000000
--- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&hym8563>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- };
-
- vcc12v_dcin: vcc12v-dcin-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vbus_host: vbus-host {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_en_oc>;
- regulator-name = "vbus_host"; /* HOST-5V */
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vbus_typec: vbus-typec {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_en_oc>;
- regulator-name = "vbus_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&gmac {
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- vqmmc-supply = <&vccio_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
diff --git a/board/amarula/vyasa-rk3288/MAINTAINERS b/board/amarula/vyasa-rk3288/MAINTAINERS
index 08ea208004a2..d9cf639a31d2 100644
--- a/board/amarula/vyasa-rk3288/MAINTAINERS
+++ b/board/amarula/vyasa-rk3288/MAINTAINERS
@@ -4,5 +4,4 @@ S: Maintained
F: board/amarula/vyasa-rk3288
F: include/configs/vyasa-rk3288.h
F: configs/vyasa-rk3288_defconfig
-F: arch/arm/dts/rk3288-vyasa.dts
F: arch/arm/dts/rk3288-vyasa-u-boot.dtsi
diff --git a/board/chipspark/popmetal_rk3288/MAINTAINERS b/board/chipspark/popmetal_rk3288/MAINTAINERS
index e12f128dcd70..c81905453f2f 100644
--- a/board/chipspark/popmetal_rk3288/MAINTAINERS
+++ b/board/chipspark/popmetal_rk3288/MAINTAINERS
@@ -1,7 +1,6 @@
POPMETAL-RK3288
M: Lin Huang <hl@rock-chips.com>
S: Maintained
-F: arch/arm/dts/rk3288-popmetal.dts
F: arch/arm/dts/rk3288-popmetal-u-boot.dtsi
F: board/chipspark/popmetal_rk3288
F: include/configs/popmetal_rk3288.h
diff --git a/board/radxa/rock2/MAINTAINERS b/board/radxa/rock2/MAINTAINERS
index af974c983047..a697e68281a4 100644
--- a/board/radxa/rock2/MAINTAINERS
+++ b/board/radxa/rock2/MAINTAINERS
@@ -1,7 +1,6 @@
FIREFLY
M: Simon Glass <sjg@chromium.org>
S: Maintained
-F: arch/arm/dts/rk3288-rock2*
F: board/radxa/rock2
F: include/configs/rock2.h
F: configs/rock2_defconfig
diff --git a/board/rockchip/evb_rk3288/MAINTAINERS b/board/rockchip/evb_rk3288/MAINTAINERS
index 9857ae335754..60f97d7eb3b9 100644
--- a/board/rockchip/evb_rk3288/MAINTAINERS
+++ b/board/rockchip/evb_rk3288/MAINTAINERS
@@ -1,12 +1,10 @@
EVB-RK3288
M: Lin Huang <hl@rock-chips.com>
S: Maintained
-F: arch/arm/dts/rk3288-evb.dts
-F: arch/arm/dts/rk3288-evb.dtsi
-F: arch/arm/dts/rk3288-evb-u-boot.dtsi
+F: arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
F: board/rockchip/evb_rk3288
F: include/configs/evb_rk3288.h
-F: configs/evb-rk3288_defconfig
+F: configs/evb-rk3288-rk808_defconfig
ROCK-PI-N8
M: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288-rk808_defconfig
similarity index 94%
rename from configs/evb-rk3288_defconfig
rename to configs/evb-rk3288-rk808_defconfig
index 02347b58c229..8e140d6e41cd 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288-rk808_defconfig
@@ -9,7 +9,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-evb-rk808"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -29,7 +29,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-evb-rk808.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_NO_BSS_LIMIT=y
@@ -52,6 +52,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig
index ee9cc2bd8222..461fa5d432a8 100644
--- a/configs/phycore-rk3288_defconfig
+++ b/configs/phycore-rk3288_defconfig
@@ -26,7 +26,7 @@ CONFIG_DEBUG_UART=y
CONFIG_LTO=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-phycore-rdk.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig
index 95c1097bc93e..4489c0393501 100644
--- a/configs/popmetal-rk3288_defconfig
+++ b/configs/popmetal-rk3288_defconfig
@@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-popmetal"
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
@@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-popmetal.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -47,6 +47,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig
index 0a88037cefdb..ae2f9e9bb17f 100644
--- a/configs/rock-pi-n8-rk3288_defconfig
+++ b/configs/rock-pi-n8-rk3288_defconfig
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock-pi-n8"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock-pi-n8"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -45,6 +45,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
index 35f449ab567e..dd296efaf1ad 100644
--- a/configs/rock2_defconfig
+++ b/configs/rock2_defconfig
@@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock2-square"
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
@@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-rock2-square.dtb"
CONFIG_SILENT_CONSOLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -47,6 +47,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index c9de6f8ad26c..8ac1c9620c65 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -11,7 +11,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-vyasa"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -26,7 +26,7 @@ CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-vyasa.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_NO_BSS_LIMIT=y
@@ -53,6 +53,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 6ae4d4371ff6..08ab2ac69e50 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -40,15 +40,17 @@ List of mainline supported Rockchip boards:
* rk3229
- Rockchip Evb-RK3229 (evb-rk3229)
* rk3288
- - Rockchip Evb-RK3288 (evb-rk3288)
+ - Rockchip Evb-RK3288-rk808 (evb-rk3288-rk808)
- Firefly-RK3288 (firefly-rk3288)
- MQmaker MiQi (miqi-rk3288)
- Phytec RK3288 PCM-947 (phycore-rk3288)
- PopMetal-RK3288 (popmetal-rk3288)
- Radxa Rock 2 Square (rock2)
+ - Radxa Rock Pi N8 (rock-pi-n8-rk3288)
- Tinker-RK3288 (tinker-rk3288)
+ - Tinker-S-RK3288 (tinker-s-rk3288)
- Google Jerry (chromebook_jerry)
- - Google Mickey (chromebook_mickey)
+ - Google Mickey (chromebit_mickey)
- Google Minnie (chromebook_minnie)
- Google Speedy (chromebook_speedy)
- Amarula Vyasa-RK3288 (vyasa-rk3288)
@@ -244,7 +246,7 @@ To build rk3288 boards:
.. code-block:: bash
- make evb-rk3288_defconfig
+ make evb-rk3288-mk808_defconfig
make CROSS_COMPILE=arm-linux-gnueabihf-
To build rk3308 boards:
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 6/6] rockchip: imply OF_UPSTREAM for rk3288 boards
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
` (3 preceding siblings ...)
2026-01-11 16:31 ` [PATCH v2 5/6] rockchip: Switch remaining rk3288 " Johan Jonker
@ 2026-01-11 16:31 ` Johan Jonker
2026-01-11 16:33 ` [PATCH v2 1/6] ARM: dts: rockchip: Remove mshc aliases from RK3288 Johan Jonker
2026-01-16 10:09 ` [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Sumit Garg
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:31 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
Imply OF_UPSTREAM for rk3288 boards.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm/mach-rockchip/Kconfig | 1 +
configs/chromebit_mickey_defconfig | 1 -
configs/chromebook_jerry_defconfig | 1 -
configs/chromebook_minnie_defconfig | 1 -
configs/chromebook_speedy_defconfig | 1 -
configs/evb-rk3288-rk808_defconfig | 1 -
configs/firefly-rk3288_defconfig | 1 -
configs/miqi-rk3288_defconfig | 1 -
configs/phycore-rk3288_defconfig | 1 -
configs/popmetal-rk3288_defconfig | 1 -
configs/rock-pi-n8-rk3288_defconfig | 1 -
configs/rock2_defconfig | 1 -
configs/tinker-rk3288_defconfig | 1 -
configs/tinker-s-rk3288_defconfig | 1 -
configs/vyasa-rk3288_defconfig | 1 -
15 files changed, 1 insertion(+), 14 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 92bb4aa62f11..5eac0cb7d94e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -132,6 +132,7 @@ config ROCKCHIP_RK3288
select SPL
select SUPPORT_TPL
select FDT_64BIT
+ imply OF_UPSTREAM
imply PRE_CONSOLE_BUFFER
imply ROCKCHIP_COMMON_BOARD
imply SPL_ROCKCHIP_COMMON_BOARD
diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig
index 1ae596b4f4f6..60ceae8f1531 100644
--- a/configs/chromebit_mickey_defconfig
+++ b/configs/chromebit_mickey_defconfig
@@ -56,7 +56,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 5151af8838e4..5e89311affe3 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -56,7 +56,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig
index 3ab1e90746f5..6e0158fd4a9e 100644
--- a/configs/chromebook_minnie_defconfig
+++ b/configs/chromebook_minnie_defconfig
@@ -57,7 +57,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig
index 796d29604242..86f1399c0e3c 100644
--- a/configs/chromebook_speedy_defconfig
+++ b/configs/chromebook_speedy_defconfig
@@ -57,7 +57,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/evb-rk3288-rk808_defconfig b/configs/evb-rk3288-rk808_defconfig
index 8e140d6e41cd..2112e475ad31 100644
--- a/configs/evb-rk3288-rk808_defconfig
+++ b/configs/evb-rk3288-rk808_defconfig
@@ -52,7 +52,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index d7b01e67db9b..54e3c41f3ccf 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -42,7 +42,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig
index a4d24c11fe81..4cbd4b97172a 100644
--- a/configs/miqi-rk3288_defconfig
+++ b/configs/miqi-rk3288_defconfig
@@ -41,7 +41,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig
index 461fa5d432a8..a374f90982e0 100644
--- a/configs/phycore-rk3288_defconfig
+++ b/configs/phycore-rk3288_defconfig
@@ -48,7 +48,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig
index 4489c0393501..52d38f4108c3 100644
--- a/configs/popmetal-rk3288_defconfig
+++ b/configs/popmetal-rk3288_defconfig
@@ -47,7 +47,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig
index ae2f9e9bb17f..242aa89bcce0 100644
--- a/configs/rock-pi-n8-rk3288_defconfig
+++ b/configs/rock-pi-n8-rk3288_defconfig
@@ -45,7 +45,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
index dd296efaf1ad..025b55e2171b 100644
--- a/configs/rock2_defconfig
+++ b/configs/rock2_defconfig
@@ -47,7 +47,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index afbb394228f7..2e701a5ff722 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -42,7 +42,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
index 876086573d31..816903c8430e 100644
--- a/configs/tinker-s-rk3288_defconfig
+++ b/configs/tinker-s-rk3288_defconfig
@@ -42,7 +42,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index 8ac1c9620c65..1d7e22653608 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -53,7 +53,6 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 1/6] ARM: dts: rockchip: Remove mshc aliases from RK3288
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
` (4 preceding siblings ...)
2026-01-11 16:31 ` [PATCH v2 6/6] rockchip: imply OF_UPSTREAM for rk3288 boards Johan Jonker
@ 2026-01-11 16:33 ` Johan Jonker
2026-01-16 10:09 ` [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Sumit Garg
6 siblings, 0 replies; 8+ messages in thread
From: Johan Jonker @ 2026-01-11 16:33 UTC (permalink / raw)
To: kever.yang
Cc: sjg, philipp.tomsich, sumit.garg, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
The use of mshc aliases is deprecated for some while,
so remove them from the rk3288.dtsi file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/3e461bce-e8e6-48f1-a296-34040447ff25@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: cafaf99e4a790f8492a034a3470f878779c8c535 ]
(cherry picked from commit faefae4ca217961a0d96a54c9618e56aa8fd37b3)
---
dts/upstream/src/arm/rockchip/rk3288.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/dts/upstream/src/arm/rockchip/rk3288.dtsi b/dts/upstream/src/arm/rockchip/rk3288.dtsi
index 42d705b544ec..7e284b4fecdc 100644
--- a/dts/upstream/src/arm/rockchip/rk3288.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3288.dtsi
@@ -34,10 +34,6 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
- mshc0 = &emmc;
- mshc1 = &sdmmc;
- mshc2 = &sdio0;
- mshc3 = &sdio1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
` (5 preceding siblings ...)
2026-01-11 16:33 ` [PATCH v2 1/6] ARM: dts: rockchip: Remove mshc aliases from RK3288 Johan Jonker
@ 2026-01-16 10:09 ` Sumit Garg
6 siblings, 0 replies; 8+ messages in thread
From: Sumit Garg @ 2026-01-16 10:09 UTC (permalink / raw)
To: Johan Jonker
Cc: kever.yang, sjg, philipp.tomsich, trini, u-boot, hl, jagan,
jernej.skrabec, w.egorov, jonas, michael
On Sun, Jan 11, 2026 at 05:27:03PM +0100, Johan Jonker wrote:
> The device tree for rk3288 combined is now
> available in the /dts/upstream directory.
> Use imply OF_UPSTREAM to migrate all rk3288 boards.
> Clean up MAINTAINERS.
>
> Changed V2:
> Rebase
> Moved upstream changes to separate patches
> Split in smaller pieces
>
> Johan Jonker (6):
> ARM: dts: rockchip: Remove mshc aliases from RK3288
> ARM: dts: rockchip: Add spi_flash label to rk3288-veyron
> ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288
> rockchip: Switch rk3288-veyron boards to upstream devicetree
> rockchip: Switch remaining rk3288 boards to upstream devicetree
> rockchip: imply OF_UPSTREAM for rk3288 boards
Glad to see the diffstat, fwiw:
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
-Sumit
>
> arch/arm/dts/cros-ec-sbs.dtsi | 52 --
> ...boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} | 0
> arch/arm/dts/rk3288-evb.dts | 20 -
> arch/arm/dts/rk3288-evb.dtsi | 476 -----------
> arch/arm/dts/rk3288-popmetal.dts | 20 -
> arch/arm/dts/rk3288-popmetal.dtsi | 547 ------------
> arch/arm/dts/rk3288-rock-pi-n8.dts | 17 -
> arch/arm/dts/rk3288-rock2-som.dtsi | 278 ------
> arch/arm/dts/rk3288-rock2-square.dts | 181 ----
> arch/arm/dts/rk3288-veyron-chromebook.dtsi | 205 -----
> arch/arm/dts/rk3288-veyron-jerry.dts | 208 -----
> arch/arm/dts/rk3288-veyron-mickey.dts | 266 ------
> arch/arm/dts/rk3288-veyron-minnie.dts | 302 -------
> arch/arm/dts/rk3288-veyron-speedy.dts | 143 ----
> arch/arm/dts/rk3288-veyron.dtsi | 795 ------------------
> arch/arm/dts/rk3288-vmarc-som.dtsi | 361 --------
> arch/arm/dts/rk3288-vyasa.dts | 473 -----------
> .../dts/rockchip-radxa-dalang-carrier.dtsi | 137 ---
> arch/arm/mach-rockchip/Kconfig | 1 +
> board/amarula/vyasa-rk3288/MAINTAINERS | 1 -
> board/chipspark/popmetal_rk3288/MAINTAINERS | 1 -
> board/google/veyron/MAINTAINERS | 10 +-
> board/radxa/rock2/MAINTAINERS | 1 -
> board/rockchip/evb_rk3288/MAINTAINERS | 6 +-
> configs/chromebit_mickey_defconfig | 4 +-
> configs/chromebook_jerry_defconfig | 4 +-
> configs/chromebook_minnie_defconfig | 4 +-
> configs/chromebook_speedy_defconfig | 4 +-
> ...8_defconfig => evb-rk3288-rk808_defconfig} | 4 +-
> configs/firefly-rk3288_defconfig | 1 -
> configs/miqi-rk3288_defconfig | 1 -
> configs/phycore-rk3288_defconfig | 3 +-
> configs/popmetal-rk3288_defconfig | 4 +-
> configs/rock-pi-n8-rk3288_defconfig | 2 +-
> configs/rock2_defconfig | 4 +-
> configs/tinker-rk3288_defconfig | 1 -
> configs/tinker-s-rk3288_defconfig | 1 -
> configs/vyasa-rk3288_defconfig | 4 +-
> doc/board/rockchip/rockchip.rst | 8 +-
> .../src/arm/rockchip/rk3288-veyron.dtsi | 2 +-
> dts/upstream/src/arm/rockchip/rk3288.dtsi | 9 +-
> 41 files changed, 30 insertions(+), 4531 deletions(-)
> delete mode 100644 arch/arm/dts/cros-ec-sbs.dtsi
> rename arch/arm/dts/{rk3288-evb-u-boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} (100%)
> delete mode 100644 arch/arm/dts/rk3288-evb.dts
> delete mode 100644 arch/arm/dts/rk3288-evb.dtsi
> delete mode 100644 arch/arm/dts/rk3288-popmetal.dts
> delete mode 100644 arch/arm/dts/rk3288-popmetal.dtsi
> delete mode 100644 arch/arm/dts/rk3288-rock-pi-n8.dts
> delete mode 100644 arch/arm/dts/rk3288-rock2-som.dtsi
> delete mode 100644 arch/arm/dts/rk3288-rock2-square.dts
> delete mode 100644 arch/arm/dts/rk3288-veyron-chromebook.dtsi
> delete mode 100644 arch/arm/dts/rk3288-veyron-jerry.dts
> delete mode 100644 arch/arm/dts/rk3288-veyron-mickey.dts
> delete mode 100644 arch/arm/dts/rk3288-veyron-minnie.dts
> delete mode 100644 arch/arm/dts/rk3288-veyron-speedy.dts
> delete mode 100644 arch/arm/dts/rk3288-veyron.dtsi
> delete mode 100644 arch/arm/dts/rk3288-vmarc-som.dtsi
> delete mode 100644 arch/arm/dts/rk3288-vyasa.dts
> delete mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> rename configs/{evb-rk3288_defconfig => evb-rk3288-rk808_defconfig} (95%)
>
> --
> 2.39.5
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2026-01-16 10:10 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-01-11 16:27 [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Johan Jonker
2026-01-11 16:30 ` [PATCH v2 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron Johan Jonker
2026-01-11 16:30 ` [PATCH v2 3/6] ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288 Johan Jonker
2026-01-11 16:31 ` [PATCH v2 4/6] rockchip: Switch rk3288-veyron boards to upstream devicetree Johan Jonker
2026-01-11 16:31 ` [PATCH v2 5/6] rockchip: Switch remaining rk3288 " Johan Jonker
2026-01-11 16:31 ` [PATCH v2 6/6] rockchip: imply OF_UPSTREAM for rk3288 boards Johan Jonker
2026-01-11 16:33 ` [PATCH v2 1/6] ARM: dts: rockchip: Remove mshc aliases from RK3288 Johan Jonker
2026-01-16 10:09 ` [PATCH v2 0/6] rockchip: use OF_UPSTREAM for rk3288 Sumit Garg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox