[U-Boot-Users] loadb problem

[U-Boot-Users] loadb problem

[Hurricane555]

Yesterday I wanted to load a binary over serial port but I can?t. The console
is running and I can make input over serial and output is running too.

What could be wrong?

I tried to load binary with TeraTerm and Hyperterminal!? I chose
Kermitprotocol!
--
View this message in context: http://www.nabble.com/loadb-problem-t1429882.html#a3856501
Sent from the Uboot - Users forum at Nabble.com.

[U-Boot-Users] loadb problem

[Wolfgang Denk]

In message <3856501.post@talk.nabble.com> you wrote:
> 
> Yesterday I wanted to load a binary over serial port but I can=C2=B4t. The =
> console
> is running and I can make input over serial and output is running too.

And what exactly is the problem? Are  there  any  error  messages  or
what?  What  was  the exact commands you entered, and what output did
you get?

> I tried to load binary with TeraTerm and Hyperterminal!? I chose
> Kermitprotocol!

Try using kermit instead...

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The manager will be continually amazed that policies he took for com-
mon knowledge are totally unknown by some member of his  team.  Since
his fundamental job is to keep everybody going in the same direction,
his chief daily task will be communication, not decision-making.
                              - Fred Brooks, "The Mythical Man Month"

[U-Boot-Users] loadb problem

[Hurricane555]

I found the problem! I switched the byteorder in FIFO for my BIG_ENDIAN
System!


--
View this message in context: http://www.nabble.com/loadb-problem-t1429882.html#a3859687
Sent from the Uboot - Users forum at Nabble.com.