* [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler
@ 2002-11-20 18:03 Pierre AUBERT
2002-11-22 23:21 ` Wolfgang Denk
0 siblings, 1 reply; 5+ messages in thread
From: Pierre AUBERT @ 2002-11-20 18:03 UTC (permalink / raw)
To: u-boot
Hello everybody,
Please find attached a patch that add support for the Epson SED13806
graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the
RPXClassic.h file for the details
of the configuration.
This patch also adds the support of the BMP logo in cfb_console driver.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler
2002-11-20 18:03 [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler Pierre AUBERT
@ 2002-11-22 23:21 ` Wolfgang Denk
2002-11-25 7:24 ` Pierre AUBERT
0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Denk @ 2002-11-22 23:21 UTC (permalink / raw)
To: u-boot
Dear Pierre,
in message <3DDBCE60.E0021D2C@staubli.com> you wrote:
>
> Please find attached a patch that add support for the Epson SED13806
> graphic controller. This controller
Added, thanks.
> is used on the Embedded Planet ECCX daughter board. Please see the
> RPXClassic.h file for the details
> of the configuration.
Is there any reason so this driver is restricted to the RPXClassic
board? Should we not move the driver into the drivers/ directory
instead?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
If in any problem you find yourself doing an immense amount of work,
the answer can be obtained by simple inspection.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler
2002-11-22 23:21 ` Wolfgang Denk
@ 2002-11-25 7:24 ` Pierre AUBERT
2002-11-25 13:25 ` Wolfgang Denk
0 siblings, 1 reply; 5+ messages in thread
From: Pierre AUBERT @ 2002-11-25 7:24 UTC (permalink / raw)
To: u-boot
Hello Wolfgang
Wolfgang Denk wrote:
> Dear Pierre,
>
> in message <3DDBCE60.E0021D2C@staubli.com> you wrote:
> >
> > Please find attached a patch that add support for the Epson SED13806
> > graphic controller. This controller
>
> Added, thanks.
>
> > is used on the Embedded Planet ECCX daughter board. Please see the
> > RPXClassic.h file for the details
> > of the configuration.
>
> Is there any reason so this driver is restricted to the RPXClassic
> board? Should we not move the driver into the drivers/ directory
> instead?
The
The RPXClassic specific part of the driver (init of ECCX board registers,
config of the screen attached to the
board) is in the RPXClassic directory. The generic part of the driver
(handling of the Epson controller) is in the
drivers/sed13806.c file. This driver isn't restricted to te RPXClassic
board, I use it for a custom board.
>
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering: Embedded and Realtime Systems, Embedded Linux
> Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
> If in any problem you find yourself doing an immense amount of work,
> the answer can be obtained by simple inspection.
Best regards
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler
2002-11-25 7:24 ` Pierre AUBERT
@ 2002-11-25 13:25 ` Wolfgang Denk
0 siblings, 0 replies; 5+ messages in thread
From: Wolfgang Denk @ 2002-11-25 13:25 UTC (permalink / raw)
To: u-boot
Dear Pierre,
in message <3DE1D038.71FD5C0@staubli.com> you wrote:
>
> The RPXClassic specific part of the driver (init of ECCX board registers,
> config of the screen attached to the
> board) is in the RPXClassic directory. The generic part of the driver
> (handling of the Epson controller) is in the
> drivers/sed13806.c file. This driver isn't restricted to te RPXClassic
> board, I use it for a custom board.
I see. Thanks!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Dear Lord: I just want *one* one-armed manager so I never have to
hear "On the other hand", again.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler
@ 2002-11-20 18:09 Pierre AUBERT
0 siblings, 0 replies; 5+ messages in thread
From: Pierre AUBERT @ 2002-11-20 18:09 UTC (permalink / raw)
To: u-boot
Hello everybody,
Please find attached a patch that add support for the Epson SED13806
graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the
RPXClassic.h file for the details
of the configuration.
This patch also adds the support of the BMP logo in cfb_console driver.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-11-25 13:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-20 18:03 [U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler Pierre AUBERT
2002-11-22 23:21 ` Wolfgang Denk
2002-11-25 7:24 ` Pierre AUBERT
2002-11-25 13:25 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2002-11-20 18:09 Pierre AUBERT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox