[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Pierre AUBERT]

Hello everybody,

Please find attached a patch that add support for the Epson SED13806
graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the
RPXClassic.h file for the details
of the configuration.

This patch also adds the support of the BMP logo in cfb_console driver.

[U-Boot-Users] Re: PATCH: Driver for the Epson SED13806 graphic controler

[Pierre AUBERT]

Pierre AUBERT wrote:

> Hello everybody,
>
> Please find attached a patch that add support for the Epson SED13806
> graphic controller. This controller
> is used on the Embedded Planet ECCX daughter board. Please see the
> RPXClassic.h file for the details
> of the configuration.
>
> This patch also adds the support of the BMP logo in cfb_console driver.
> >From now, the cfb_console driver
> was only able to display the logo included in the file logo_linux.h. The
> MPC8xx LCD driver use the logo
> included in bmp_logo.h. This file is very easy to create because the
> tool bmp_logo is included in U-boot.
> I saw that the video driver for the MPC8xx use another logo created by
> easy_logo. I think that it would be nie to use
> only one file format in all the graphic drivers.
> To use the BMP logo with the cfb_console driver, add #define
> CONFIG_VIDEO_BMP_LOGO in the board config
> file (see RPXClassic.h).
>
> This patch fixes also a warning in mkimage.c.
>
> CHANGELOG:
> * Patch by Pierre Aubert , 20 Nov 2002
>   Add driver for Epson SED13806 graphic controller.
>   Add support for BMP logos in cfb_console driver.
>
> Best regards
>

Here's the README patch that was forgotten in my last post


--- ppcboot-2.0.0-cvs/README    2002-11-21 13:50:01.000000000 +0100
+++ ppcboot-2.0.0-lcd/README    2002-11-21 14:06:50.000000000 +0100
@@ -423,6 +423,9 @@ The following options need to be configu
                                                (requires CFG_CMD_DATE)
                        CONFIG_VIDEO_LOGO       display Linux logo in
                                                upper left corner
+                       CONFIG_VIDEO_BMP_LOGO   use bmp_logo.h instead of
+                                               linux_logo.h for logo.
+                                               Requires CONFIG_VIDEO_LOGO
                        CONFIG_CONSOLE_EXTRA_INFO
                                                addional board info beside
                                                the logo
@@ -710,6 +713,11 @@ The following options need to be configu
         16,7 Mill (24bit)     315       318       31b
                (i.e. setenv videomode 317; saveenv; reset;)

+               CONFIG_VIDEO_SED13806
+               Enable Epson SED13806 driver. This driver supports 8bpp and
+               16bpp modes defined by
+               CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP
+
 - LCD Support: CONFIG_LCD

                Define this to enable LCD support (for output to LCD

[U-Boot-Users] Re: PATCH: Driver for the Epson SED13806 graphic controler

[Wolfgang Denk]

Dear Pierre,

in message <3DDCDB16.6E94A6FC@staubli.com> you wrote:
> 
> Here's the README patch that was forgotten in my last post

Thanks, added.

Viele Gr??e,
Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
...the increased productivity fostered by a friendly environment  and
quality  tools  is  essential  to  meet  ever  increasing demands for
software.               - M. D. McIlroy, E. N. Pinson and B. A. Tague