[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Pierre AUBERT]

Hello everybody,

Please find attached a patch that add support for the Epson SED13806
graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the
RPXClassic.h file for the details
of the configuration.

This patch also adds the support of the BMP logo in cfb_console driver.

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Pierre AUBERT]

Hello everybody,

Please find attached a patch that add support for the Epson SED13806
graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the
RPXClassic.h file for the details
of the configuration.

This patch also adds the support of the BMP logo in cfb_console driver.

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Wolfgang Denk]

Dear Pierre,

in message <3DDBCE60.E0021D2C@staubli.com> you wrote:
> 
> Please find attached a patch that add support for the Epson SED13806
> graphic controller. This controller

Added, thanks.

> is used on the Embedded Planet ECCX daughter board. Please see the
> RPXClassic.h file for the details
> of the configuration.

Is there any reason so this driver is restricted  to  the  RPXClassic
board?  Should  we  not  move  the driver into the drivers/ directory
instead?


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
If in any problem you find yourself doing an immense amount of  work,
the answer can be obtained by simple inspection.

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Pierre AUBERT]

Hello Wolfgang

Wolfgang Denk wrote:

> Dear Pierre,
>
> in message <3DDBCE60.E0021D2C@staubli.com> you wrote:
> >
> > Please find attached a patch that add support for the Epson SED13806
> > graphic controller. This controller
>
> Added, thanks.
>
> > is used on the Embedded Planet ECCX daughter board. Please see the
> > RPXClassic.h file for the details
> > of the configuration.
>
> Is there any reason so this driver is restricted  to  the  RPXClassic
> board?  Should  we  not  move  the driver into the drivers/ directory
> instead?

The
The RPXClassic specific part of the driver (init of ECCX board registers,
config of the screen attached to the
board) is in the RPXClassic directory. The generic part of the driver
(handling of the Epson controller) is in the
drivers/sed13806.c file. This driver isn't restricted to te RPXClassic
board, I use it for a custom board.

>
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> If in any problem you find yourself doing an immense amount of  work,
> the answer can be obtained by simple inspection.

Best regards

[U-Boot-Users] PATCH: Driver for the Epson SED13806 graphic controler

[Wolfgang Denk]

Dear Pierre,

in message <3DE1D038.71FD5C0@staubli.com> you wrote:
> 
> The RPXClassic specific part of the driver (init of ECCX board registers,
> config of the screen attached to the
> board) is in the RPXClassic directory. The generic part of the driver
> (handling of the Epson controller) is in the
> drivers/sed13806.c file. This driver isn't restricted to te RPXClassic
> board, I use it for a custom board.

I see. Thanks!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Dear Lord: I just want *one* one-armed manager so  I  never  have  to
hear "On the other hand", again.