From mboxrd@z Thu Jan  1 00:00:00 1970
From: Donald White <dbwhite@asu.edu>
Date: Thu, 30 Jan 2003 21:59:34 -0700
Subject: [U-Boot-Users] 8260 flash programming with BDI2000
Message-ID: <3E3A02B6.2010903@asu.edu>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Group,

About a year ago I ported ppcboot 1.0.5 and HHL 2.0 to a custom 860T board.  I used 
a wiggler to support that work and to migrate the ppcboot to U-Boot.

Today I was given a custom 8260 board and a BDI2000 with bdiGDB to use in porting 
U-Boot and HHL 2.0.  I have installed the hardware and can talk to the board.

Now here is my question.  How do I use the BDI2000 to program flash?  Do I just use 
the telnet interface and do:

BDI>erase 0xfe000000 <step> <count>    ;what is step?
BDI>prog 0 u-boot.srec SREC            ;assuming u-boot is based at 0xfe000000

I am having trouble understanding the meaning of the telnet commands.  Should I just 
say I need bdiPro?

Thanks,

Don