From mboxrd@z Thu Jan  1 00:00:00 1970
From: Neil Campbell <neilc@ecs-tech.com>
Date: Tue, 18 Mar 2003 14:25:08 -0000
Subject: [U-Boot-Users] PXA250 ramdisk in flash
Message-ID: <3E772C44.11076.5C8522F3@localhost>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

I have a lubbock(dbpxa250) board which I'd like to boot from flash. I've
burned the kernel image and ramdisk image into flash and try to boot
as follows:

  => setenv bootargs root=/dev/ram0 console=ttyS0,115200
  => bootm 280000 500000
   
both images are verified ok and kernel starts but eventually falls over
when trying to mount root fs.

  Kernel command line: root=/dev/ram0 console=ttys0,115200
  RAMDISK driver initialised: 
  Kernel panic: VFS: Unable to mount root fs on 01:00

I found the setup_initrd_tag and setup_ramdisk_tag functions which pass
the ramdisk info to the kernel but the latter of these if commented out with
a #ifdef 0. Just wondered if anyone has u-boot running ok with flashed ramdisk
on the lubbock board? Or am I doing something wrong in the above steps?

 Thanks,

   Neil