From mboxrd@z Thu Jan  1 00:00:00 1970
From: Steven Scholz <steven.scholz@imc-berlin.de>
Date: Wed, 11 Jun 2003 11:09:39 +0200
Subject: [U-Boot-Users] Serial console on AT91RM9200DK???
References: <3EE6EA50.7040703@imc-berlin.de> <054901c32ff8$f5ca5a20$91f59f0a@pc0752>
Message-ID: <3EE6F1D3.6050808@imc-berlin.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Nicolas,

Thanks for your fast reply!

 > The serial configuration flag CONFIG_SERIAL3 is useless for the 
AT91RM9200DK
 > board. It is only used by the smdk boards. It should have been 
removed from
 > the configuration file.
 >
 > The AT91RM9200 U-Boot version uses effectively the Serial Debug Port.
 >
 > We are going to submit a patch correcting that mistake among other 
things
 > and adding DataFlash support.

That means that I can use the "Serial Debug Port" as a console for 
U-Boot and Linux!?

Thanks a million!

Steven