[U-Boot-Users] [PATCH] Update NetVia with V2 board support

[U-Boot-Users] [PATCH] Update NetVia with V2 board support

[Pantelis Antoniou]

Wolfgang Hi

The attached patch adds support in u-boot for the NetVia V2 board.

Possible points of interest are:

The LEDs are located on an external register so the  status_led
code got moved to the drivers directory and abstracted.

The serial console is provided by a max3100 SPI/UART converter
chip, file drivers/serial_max3100.c

Awaiting comments...

Regards

Pantelis

[U-Boot-Users] [PATCH] Update NetVia with V2 board support

[Pantelis Antoniou]

Sorry, attatched size limit removed the patch.

Here it is compressed.

Regards

Pantelis

-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_netvia_v2.patch.gz
Type: application/x-tar
Size: 10754 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20030619/3d7f242b/attachment.tar 

[U-Boot-Users] [PATCH] Update NetVia with V2 board support

[Wolfgang Denk]

In message <3EF1BBE2.8050908@intracom.gr> you wrote:
>
> Sorry, attatched size limit removed the patch.
> 
> Here it is compressed.

Sorry,  this  patch  does  not  apply  cleanly  because  it  contains
modifications  you  submitted  with  earlier patches, which have been
added since.

Please re-sync against top of CVS, and resubmit.


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
While most peoples' opinions change, the conviction of their correct-
ness never does.

[U-Boot-Users] [PATCH] Update NetVia with V2 board support

[Pantelis Antoniou]

Wolfgang Denk wrote:

>In message <3EF1BBE2.8050908@intracom.gr> you wrote:
>  
>
>>Sorry, attatched size limit removed the patch.
>>
>>Here it is compressed.
>>    
>>
>
>Sorry,  this  patch  does  not  apply  cleanly  because  it  contains
>modifications  you  submitted  with  earlier patches, which have been
>added since.
>
>Please re-sync against top of CVS, and resubmit.
>
>
>Best regards,
>
>Wolfgang Denk
>
>
Sorry, the firewall blocks cvs access, so I have to work on repository
tarballs.

I'll get the latest and retry

Regards

Pantelis