From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robin Gilks Date: Mon, 25 Aug 2003 15:17:44 +1200 Subject: [U-Boot-Users] 8xx boot - low or high Message-ID: <3F497FD8.2020006@tait.co.nz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Greetings Subject is a mpc86x based project. Up until now I've been using an eval board which boots low (from 0x100) but to save parts on the target hardware I'd like to boot high from 0xfff00100 so I don't have to set IIP (default vectors) or ISB (default IMMR) in the hardware configuration word. Can someone suggest an already implemented port of u-boot that starts from the high vector so I can get an idea of how to structure the linker control file so that start.o is *NOT* at the beginning but someplace up the image. OR Can I start execution with IMMR at 0x000000000 (by not setting ISB in the config word) and still run code from 0x100 (so I only have to pull up IIP at reset). -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks at tait.co.nz New Zealand