[U-Boot-Users] PQ2VADS (8270) & BDI2000

[U-Boot-Users] PQ2VADS (8270) & BDI2000

[Matias Sundman]

Comrades,
I have compiled uboot for the PQ2VADS Motorola
evaluation board and tried to flash it with a 
JTAG probe from GreenHills. Unfortunately their
probe does not support the 8270 architecture today.

Does BDI2000 support the ppc8270 JTAG chain architecture?

If so , does someone have a configuration file for the
PQ2VADS Motorola evaluation board?

Best Regards // Matias

[U-Boot-Users] PQ2VADS (8270) & BDI2000

[Chris Simmonds]

Hi,

I am using BDI2000 with an 8270 right now and it works fine. Its just 
the standard package for ppc 6xx/7xx/82xx/7400/7410. I used the 
configuration file for the vads8260 and fixed it up for my board (a 
custom unit). I don't have a config for the pq2vads board I'm afraid.

Chris.


Matias Sundman (TB/EAB) wrote:

>Comrades,
>I have compiled uboot for the PQ2VADS Motorola
>evaluation board and tried to flash it with a 
>JTAG probe from GreenHills. Unfortunately their
>probe does not support the 8270 architecture today.
>
>Does BDI2000 support the ppc8270 JTAG chain architecture?
>
>If so , does someone have a configuration file for the
>PQ2VADS Motorola evaluation board?
>
>Best Regards // Matias
>
>
>-------------------------------------------------------
>This sf.net email is sponsored by:ThinkGeek
>Welcome to geek heaven.
>http://thinkgeek.com/sf
>_______________________________________________
>U-Boot-Users mailing list
>U-Boot-Users at lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/u-boot-users
>


-- 
Chris Simmonds                        2net Limited
chris at 2net.co.uk                      http://www.2net.co.uk/
Tel:   +44 (0)1962 869003             Fax:   +44 (0)870 056 7556
"If it's not connected, it's not effective"(tm)