From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Simmonds Date: Mon, 06 Oct 2003 09:44:30 +0100 Subject: [U-Boot-Users] PQ2VADS (8270) & BDI2000 References: <76E5F712842F5F49A35738622BAA0F4F040869D7@ESEALNT442.al.sw.ericsson.se> Message-ID: <3F812B6E.9010507@2net.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I am using BDI2000 with an 8270 right now and it works fine. Its just the standard package for ppc 6xx/7xx/82xx/7400/7410. I used the configuration file for the vads8260 and fixed it up for my board (a custom unit). I don't have a config for the pq2vads board I'm afraid. Chris. Matias Sundman (TB/EAB) wrote: >Comrades, >I have compiled uboot for the PQ2VADS Motorola >evaluation board and tried to flash it with a >JTAG probe from GreenHills. Unfortunately their >probe does not support the 8270 architecture today. > >Does BDI2000 support the ppc8270 JTAG chain architecture? > >If so , does someone have a configuration file for the >PQ2VADS Motorola evaluation board? > >Best Regards // Matias > > >------------------------------------------------------- >This sf.net email is sponsored by:ThinkGeek >Welcome to geek heaven. >http://thinkgeek.com/sf >_______________________________________________ >U-Boot-Users mailing list >U-Boot-Users at lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/u-boot-users > -- Chris Simmonds 2net Limited chris at 2net.co.uk http://www.2net.co.uk/ Tel: +44 (0)1962 869003 Fax: +44 (0)870 056 7556 "If it's not connected, it's not effective"(tm)