From mboxrd@z Thu Jan  1 00:00:00 1970
From: Steven Scholz <steven.scholz@imc-berlin.de>
Date: Fri, 24 Oct 2003 16:18:04 +0200
Subject: [U-Boot-Users] Re: U-Boot for AT91RM9200DK
In-Reply-To: <E1AD2ZT-0000ZU-00@c-67-164-61-95.client.comcast.net>
References: <3F913C5A.8070303@imc-berlin.de> <E1AArOQ-0000Tm-00@c-67-164-61-95.client.comcast.net> <3F914731.1000207@imc-berlin.de> <E1AAs6Y-0000eT-00@c-67-164-61-95.client.comcast.net> <3F914F82.3060502@imc-berlin.de> <E1AAsEW-0000fj-00@c-67-164-61-95.client.comcast.net> <3F98EA80.9040302@imc-berlin.de> <E1AD2ZT-0000ZU-00@c-67-164-61-95.client.comcast.net>
Message-ID: <3F99349C.7040202@imc-berlin.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Rick,

>>Should we put all the init code into cpu/at91rm9200/{start.S} and use CONFIG_ 
>>and CFG_?
> 
>   I'd put it all in start.S and not define any CONFIG for it.
Hmm. But my boards has a completly different clocking scheme!
For instance: I use an 16MHz external clock oszillator. The eval board has an 
18,xxx MHz crystal...
So we need at least some CFG_'s for clock configuration.

Ok?

-- 
Steven Scholz

imc Measurement & Control               imc Me?systeme GmbH
Voltastr. 5                             Voltastr. 5
13355 Berlin                            13355 Berlin
Germany                                 Deutschland
fon: +49 30 467090-0                    Tel: 030 / 467090-0
fax: +49 30 4631576                     fax: 030 / 4631576