From mboxrd@z Thu Jan 1 00:00:00 1970 From: Donald White Date: Sat, 01 Nov 2003 15:50:58 -0700 Subject: [U-Boot-Users] ocdemon for initial u-boot flashing? In-Reply-To: References: Message-ID: <3FA438D2.6040208@asu.edu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Richard Klingler wrote: > Good evening.. > > > Small off-topic question (o; > > > Someone using OCDemon flash programmer for initial flashing > of u-boot to a 8260 board? > I tried this once since I used the Wiggler successfully on an MPC860 project. I couldn't get it to work. Could not get support. Bought BDI200 and have no problems. > > Installed the demo version and it keeps saying that it can't > run target code...or is unable to write to RAM location... > > Was only once able to erase an existing old firmware...but that's all. > Seems it needs some more initialisation than those offered > in the software... > > > Wrote a simple jtag flash program for Linux/Windows to do > JTAG flashing but it takes some time for programming though (o; > > > thanx for any hints > rick > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users