From mboxrd@z Thu Jan  1 00:00:00 1970
From: Pavel Bartusek <pba@sysgo.com>
Date: Fri, 21 Nov 2003 18:43:10 +0100
Subject: [U-Boot-Users] Re: Ethernet on PPC Ebony not working
Message-ID: <3FBE4EAE.30700@sysgo.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

I guess you are using 10MB ethernet. In the 440 is between EMAC and PHY 
inserted so called ZMII bridge, which can operate in several modes. If 
is in the RMII mode then is necessary to set correct speed in the ZMII 
Speed Select Register.
The following patch will fix this problem.

Pavel Bartusek
Sysgo AG
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 405gp_enet.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20031121/da5f9632/attachment.txt